VE-B10-CY-F2

Current - Output (Max):	10A
Size / Dimension:	4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	50W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input (Max):	32V
Voltage - Input (Min):	21V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC Converters are devices that convert a direct current (DC) source into either a lower or higher voltage DC source. This voltage conversion is achieved by using switching or linear techniques. DC-DC Converters normally consist of some form of semiconductor switching such as a transistor or a transformer and allow for the control of DC power supplies or the isolation of the DC source from the load. These converters can be used in a wide variety of applications, such as for solar panel energy systems, communications equipment, and medical or industrial applications.One type of DC-DC Conveter is the VE-B10-CY-F2. This converter incorporates a selectable 5V or 12V output and is designed for low ripple and low noise applications, such as with personal computers, digital signal processors, and graphics cards. The VE-B10-CY-F2 is designed with very low operating temperature, making it suitable for use in portable or low power applications. At the heart of the VE-B10-CY-F2 is a switching regulator, known as a \'Control Frequency Pulse Width Modulation\' (CFPWM). This type of DC-DC converter uses an oscillator to create a \'pulse\' of electrical current which modulates a transistor\'s output current. The CFPWM then amplifies these pulses, and converts the resulting voltage to a constant, selectable voltage across the load. The CFPWM technique is maximum efficient at operating frequencies of 20 kHz to 400 kHz, and coupled with the VE-B10-CY-F2\'s low operating temperature results in low power losses and high-efficiency operation.The VE-B10-CY-F2 also uses a variety of protection features to ensure that the device operates in the safest manner possible. These features include overvoltage protection, thermal shutdown, short circuit protection, over-current protection and output crowbar protection. All of these features are designed to help prevent damage to components due to over-heating, over-charging, short-circuiting, or other problems related to operating a DC-DC converter.Other features of the VE-B10-CY-F2 include its very small size (9.44 x 9.71 mm) and its ability to efficiently convert 5V or 12V DC to a 0.6V-30V DC output, with an output current of 2A. This makes the VE-B10-CY-F2 suitable for a wide range of applications that require the conversion of a 5V or 12V DC source into a 0.6-30V DC output. In addition, the VE-B10-CY-F2 is able to work with both single-ended and differential-ended inputs, making it suitable for use in a wide range of applications. With its low operating temperature, high efficiency, and its wide range of features, the VE-B10-CY-F2 is an ideal choice for applications requiring the efficient conversion of a 5V or 12V DC source into a 0.6-30V DC output.

The specific data is subject to PDF, and the above content is for reference