VE-B10-IX-F2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are commonly used in a vast array of applications. One such converter is the VE-B10-IX-F2, which is a self-contained DC-DC converter. This particular converter is designed for applications requiring a regulated and isolated output from a nominal input voltage, and delivers 10A, with up to 85% efficiency.

VE-B10-IX-F2 are designed to operate at any input voltage between 2.5V and 10.5V and provide an isolated, regulated output voltage of 12Vdc at 10A maximum load current. The converter operates in buck-boost mode which results in excellent regulation over a wide input voltage range. The converter also features a minimum isolation voltage of 1,500V rms, input under voltage shut down, output short-circuit protection, and thermal protection.

The circuitry used in VE-B10-IX-F2 converters is essentially a Buck-Boost Converter, where power is transferred from the input to the output with an electronic switch that is switched at a given frequency. This type of converter allows the output voltage to be trimmed to the proper level via a divider and input to anerror amplifier. This is used to regulate the output voltage by varying the duty cycle of the switch in the converter.

The main components of the converter are the Input rectifier, the DC-DC converter, the Output rectifier and a low pass filter. The Input rectifier converts the AC current to DC current to provide a constant voltage to the DC-DC converter. The DC-DC converter can either increase or decrease the voltage based in its design, and in this case it is configured to increase the voltage from the input to the output. The Output rectifier then converts the DC current from the DC-DC converter to AC and the low-pass filter is used to limit the output voltage ripple.

In order to ensure proper operation, the VE-B10-IX-F2 converters should be operated in an ambient temperature of -20℃ to 85℃. It is recommended to provide adequate cooling of the converter to ensure its reliability as the converter can become thermally unstable when operated outside of the specified temperature range.

In conclusion, the VE-B10-IX-F2 DC-DC Converter is capable of providing an isolated, regulated output voltage of 12Vdc from an input voltage of 2.5V to 10.5V at 10A maximum load current. The converter is quite efficient in its operation and provides thermal protection and short-circuit protection.

The specific data is subject to PDF, and the above content is for reference