VE-B10-IX-F4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters have been used in various industrial and commercial-scale applications for decades, particularly where regulating the output voltage of a DC source is needed. A DC-DC converter takes a direct current input from either a battery or the power grid and converts it to a higher or lower voltage output. The VE-B10-IX-F4 is a general-purpose, pulse- width-modulated DC-DC converter from Vernitron, a major manufacturer of power conversion equipment. It is designed for a wide range of applications, including commercial and industrial applications and clean energy systems.

The VE-B10-IX-F4 is a step-down DC-DC converter, meaning it takes a direct current input that is greater than the output voltage and drops the voltage for the output. It is considered a step-down converter because it converts higher input voltage to lower output voltage. It can be used in any situation where it is required to step down a voltage from its input level. This device can accept input voltage between 12 to 40 volts and offers an adjustable output voltage between 0 to 60 volts. The VE-B10-IX-F4 has a small 5mm x 7mm footprint and a wide range of operating temperature, from -30 to +82 degrees Celsius.

The VE-B10-IX-F4 provides superior transient performance compared to most other pulse-width-modulated (PWM) converters. It is designed to minimize the electromagnetic interference (EMI) generated by the switching operations, as well as deliver an efficient and reliable output. The device offers dual-mode protection for overvoltage and overcurrent to ensure protection of the load. Additionally, the device contains built-in protection against over-temperature and reverse connection.

The working principle of a DC-DC converter is simple. A direct current is converted into an alternating current, and the alternating current is then used to turn a transformer. The transformer steps up or steps down the input voltage to the desired output voltage. The output current is then adjusted by adjusting the pulse-width modulation of the switching transistor, which determines the on and off time of the switching cycle. The switching cycle is then rectified back into a DC current.

VE-B10-IX-F4 provides an efficient power conversion for many applications. In addition to its small size, wide operating temperature range, and superior transient performance, it also provides protection against EMI, overvoltage, overcurrent, and reverse connection. These features make it suitable for use in medical, automotive, clean energy, and many other applications.

The specific data is subject to PDF, and the above content is for reference