VE-B10-MV-B1

Current - Output (Max):	30A
Size / Dimension:	4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	150W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input (Max):	32V
Voltage - Input (Min):	21V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are electronic devices that convert direct current (DC) from one voltage level to another. They are commonly used in a wide range of applications, such as industrial, automotive and consumer electronics. The most common type of DC-DC converter is the step-down or buck converter, which converts a higher voltage to a lower voltage.The VE-B10-MV-B1 is a DC-DC converter that can be used for many applications. It is a buck converter that can take in an input voltage up to 40V, and provides a regulated output voltage of 5V or 12V. The device can handle a power up to 50W and is commonly used in industrial and computer applications.The VE-B10-MV-B1 is packaged in a standard SOT223 package, making it suitable for high-volume commercial applications. The device is also RoHS (Restriction of Hazardous Substances) and WEEE (Waste Electrical and Electronic Equipment) compliant, making it environmentally friendly.The VE-B10-MV-B1 uses a Flyback topology to perform buck voltage conversion. A current switch, along with a diode, is used to control the flow of current into an inductor. The current switch then turns off and the inductor stores energy in its magnetic field. The stored energy is then released back into the circuit and the voltage of the circuit becomes regulated at the desired output voltage.The current control for the device is provided by an external resistive voltage divider. This mode requires a precision external resistor divider to provide the control voltage, which allows for accurate voltage regulation. The device supports two modes of operation: an analog mode that allows for direct voltage control and a digital mode that allows for voltage control through internal registers. The device also supports an optional frequency-control mode that allows the switching frequency to be changed between 250 kHz and 1.25 MHz by adjusting the external resistance divider. This allows for higher efficiency at low output power levels and a faster transient response.The VE-B10-MV-B1 is a versatile device that is suitable for many applications. It can be used to provide highly efficient and regulated power for a variety of industrial and computer applications. The device\'s advanced features, such as voltage and frequency control, make it ideal for applications where precision and stability are required.

The specific data is subject to PDF, and the above content is for reference