Allicdata Part #: | VE-B2K-IX-F4-ND |
Manufacturer Part#: |
VE-B2K-IX-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 40V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 40V 1.... |
DataSheet: | VE-B2K-IX-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 1.88A |
Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VE-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 40V |
Voltage - Input (Max): | 56V |
Voltage - Input (Min): | 21V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters allow smoother operation of electrical equipment by reducing the voltage from one DC source to another. The VE-B2K-IX-F4 DC DC converter is designed for industrial, mobile, and energy storage applications.
The VE-B2K-IX-F4 is a three-phase, DC DC converter, which stands for “Varied Efficiency Between Two Kilowatts In Exchange With Four Phase Units”. It has an input range of 24V to 260V, and an output range of 12V to 130V. This three phase DC DC converter is highly efficient, utilizing PFC (Power Factor Correction) circuitry to eliminates the harmonics introduced by inductive loads, and support power supply with parallel operation. It can be adjusted in either continuous conduction mode or discontinuous conduction mode as required.
The VE-B2K-IX-F4 is a powerful and reliable DC DC converter that can provide the necessary power for a variety of applications. It is suitable for a wide range of loads and has an adjustable switching frequency to meet the needs of most applications. It can be used for light construction, large machinery, trailers, railcars, generators, fuel cells, and EV charging, as well as in renewable energy systems, power electronics, HVAC systems, etc.
In addition to its excellent performance, the VE-B2K-IX-F4 also features a wide variety of protection functions, such as over temperature, over voltage, under voltage, and overcurrent protection. This DC DC converter has an output current of 200A for optimal efficiency without overheating, making it an ideal choice for many industrial and commercial applications.
The VE-B2K-IX-F4’s working principle involves the use of a continuous power semiconductor switch that alternately switches the high and low-side switches of the output stage, creating a square wave at the output. This output is then fed into a full-wave bridge rectifier, and the resulting Rectified Voltage is then fed to the output stage, where it is converted into regulated DC voltage.
The VE-B2K-IX-F4 is an ideal choice for a variety of power conversion applications. It can provide clean, regulated DC power, is efficient with minimal power loss, and has a wide variety of protective features. It is easy to install and has a simple and intuitive interface. In addition, it can be used in parallel applications to increase its output power capability.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...