VE-B2Y-MY-S Allicdata Electronics
Allicdata Part #:

VE-B2Y-MY-S-ND

Manufacturer Part#:

VE-B2Y-MY-S

Price: $ 0.00
Product Category:

Power Supplies - Board Mount

Manufacturer: Vicor Corporation
Short Description: DC DC CONVERTER 3.3V 33W
More Detail: Isolated Module DC DC Converter 1 Output 3.3V 3...
DataSheet: VE-B2Y-MY-S datasheetVE-B2Y-MY-S Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Current - Output (Max): 33A
Size / Dimension: 4.60" L x 1.80" W x 0.52" H (116.8mm x 45.7mm x 13.2mm)
Package / Case: Full Brick
Mounting Type: Through Hole
Efficiency: 90%
Operating Temperature: -55°C ~ 85°C
Features: OCP, OTP, OVP, SCP
Applications: ITE (Commercial)
Voltage - Isolation: 3kV
Power (Watts): 33W
Series: VE-200™
Voltage - Output 3: --
Voltage - Output 2: --
Voltage - Output 1: 3.3V
Voltage - Input (Max): 56V
Voltage - Input (Min): 21V
Number of Outputs: 1
Type: Isolated Module
Part Status: Active
Packaging: Bulk 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converter is an important device in the field of power electronics. The VE-B2Y-MY-S type DC-DC converter is one of the most commonly used DC-DC converters, which is widely used in the fields of AC/DC conversion, DC/DC conversion and DC/AC conversion. This article will discuss the application field and working principle of VE-B2Y-MY-S type DC-DC converters.The VE-B2Y-MY-S type DC-DC converter is a full-bridge rectifier circuit which is composed of a pair of diode bridges, a pulse transformer and a switching device. The pulse transformer consists of two coupled windings, a primary and a secondary winding. The secondary winding is used to transfer power from the primary side to the secondary side. The switching device is usually an electronic switch which is used to control the switching of the power. The VE-B2Y-MY-S type DC-DC converter has a wide range of application fields in AC/DC, DC/DC and DC/AC conversion. It is used to convert AC power such as grid power or battery power into DC power. Its high efficiency makes it suitable for high-power applications such as renewable energy systems. In addition, it can also be used to convert DC power into AC power. It is commonly used in motor control and appliance control applications. When it comes to the working principle of VE-B2Y-MY-S type DC-DC Converter, it is based on the half-wave and full-wave rectification process. Initially, the input power is rectified by the diode bridges and then converted to DC power with a desired voltage. Then, the DC power is fed to the switching device, which is used to control the switching of the power on and off. Finally, the output is obtained from the secondary winding of the pulse transformer. As stated above, the VE-B2Y-MY-S type DC-DC converter is a versatile device which acts as a bridge between AC power sources and DC loads. This type of converter is widely used in various application fields, such as AC/DC, DC/DC and DC/AC conversion. It is widely used to obtain desired voltage levels from different power sources with high efficiency.

The specific data is subject to PDF, and the above content is for reference

Latest Products
AEQ20B48N-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48N-6L Allicdata Electronics
AEQ20B48-L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-L Allicdata Electronics
AEQ20B48-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-6L Allicdata Electronics
AEO40Y48N-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48N-6L Allicdata Electronics
AEO40Y48-L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-L Allicdata Electronics
AEO40Y48-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-6L Allicdata Electronics