VE-B3P-CU-F3

Current - Output (Max):	14.49A
Size / Dimension:	4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	200W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	13.8V
Voltage - Input (Max):	60V
Voltage - Input (Min):	42V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

Introduction to VE-B3P-CU-F3

VE-B3P-CU-F3 is a high-conversion-efficiency surface mount DC to DC converter, which is suitable for low voltage applications. VE-B3P-CU-F3 has many features which make it an excellent choice for use in a wide range of DC to DC conversion applications. These features include high efficiency at maximum output current, low input and output voltage range, ultra-wide temperature range, over-temperature protection, short circuit protection, and a built-in power switch.

Application Field

VE-B3P-CU-F3 is widely used in low-voltage DC to DC converter applications. Its primary use is for powering single-board microcomputer system (SBCS), such as Raspberry Pi, Arduino, and Beaglebone. It can also be used to power other DC-dependent components, such as LED lighting, industrial process control, IOT (Internet of Things) devices, and telecommunications equipment. The VE-B3P-CU-F3 is also commonly used in miniature communication, automotive, and battery-powered applications. Its rugged construction and low cost makes it an ideal choice in these applications.

Working Principle

The VE-B3P-CU-F3 works by transforming the input DC voltage, usually 3.3V or 5V, into a higher voltage output. This is accomplished using a switching power regulator, which works by cycling the output voltage on and off to effectively increase the output voltage. This type of regulator is also known as a “dc/dc step-up converter” or “dc/dc booster”.The VE-B3P-CU-F3 includes a built-in power switch, which allows it to be switched on and off without having to disconnect the power supply. It also has protection features, such as over-temperature and short-circuit protection. The efficiency of the VE-B3P-CU-F3 is up to 94%, which increases the efficiency of the average system.

Conclusion

VE-B3P-CU-F3 is a powerful and reliable surface mount DC to DC converter. It is designed for use in low voltage DC to DC conversion applications and is suitable for powering single-board microcomputer systems, as well as other DC-dependent components. Its high efficiency and built-in protection features make it an excellent choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference