VE-B4J-EY-F1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters are electronic devices used to convert direct current (DC) electrical energy from one voltage level to another. Their application field and working principles, which are important aspects of modern power and electronics systems, are explained in detail here.

The most common type of DC DC Converter is the VE-B4J-EY-F1. It combines advanced digital-signal processor (DSP) technology with high-frequency switching power technology for superior performance. It is essentially a linear regulator composed of an inductor, a diode, a capacitor, and a metal-oxide-semiconductor field-effect transistor (MOSFET). Its primary function is to convert a lower input voltage to a higher output voltage.

The VE-B4J-EY-F1 DC DC Converter is designed to start up as soon as the specified input voltage is applied. It is normally used to regulate the output voltage even in case of input voltage fluctuations or load changes. It has a wide input and output voltage range, low-ripple output, and good line and load regulation. The VE-B4J-EY-F1 has built-in protection against overvoltage, current-limiting, and short circuit. Therefore, it can be used in sensitive applications such as medical equipment and component-level power supplies.

The working principle of the VE-B4J-EY-F1 DC DC Converter is based on the principle of pulse width modulation (PWM). When the input voltage is applied, an oscillator in the DSP controller generates a set of pulses that direct the switching element (MOSFET) to regulate the input voltage as required. When the MOSFET turns “on” (meaning it conducts current), it is said to be pulsed in “HIGH” state. In this state, energy is stored in the output inductor and the output capacitor. On the other hand, when the MOSFET turns “off” (meaning, it is not conducting current), the inductor discharge its energy into the output capacitor.

The output voltage of the VE-B4J-EY-F1 DC DC Converter is proportional to the duty cycle of the pulses generated by the oscillator in the DSP controller. In other words, the amount of output voltage is controlled by varying the time for which the MOSFET remains “on” (meaning, in “HIGH” state). This is done by adjusting the frequency and/or the duty cycle of the pulses generated by the oscillator. A higher frequency implies a higher switching speed and a higher output voltage while a lower duty-cycle implies a lower switching speed and a lower output voltage.

The features and performance of the VE-B4J-EY-F1 DC DC Converter make it suitable for a variety of applications. These include high-accuracy power measurement, high-frequency power supplies, switched-mode audio amplifiers, point-of-load regulators, low-noise voltage references, and automotive-electrical systems. It also finds its application in industrial-electrical systems, medical electronics, lighting-control systems, modern/corrective power supplies, and laser diode and laser-diode drivers.

To summarize, the VE-B4J-EY-F1 DC DC Converter is a linear regulator composed of an inductor, diode, capacitor, and a MOSFET. It is designed to start up as soon as the specified input voltage is applied and is normally used to regulate the output voltage even in case of input voltage fluctuations or load changes. It is used in sensitive applications such as medical equipment and component-level power supplies. Its working principle is based on the principle of pulse-width modulation. The features and performance of the VE-B4J-EY-F1 DC DC Converter make it suitable for a variety of applications, such as high-accuracy power measurement, high-frequency power supplies, switched-mode audio amplifiers, point-of-load regulators, low-noise voltage references, and automotive-electrical systems.

The specific data is subject to PDF, and the above content is for reference