| Allicdata Part #: | VE-B4L-CW-ND |
| Manufacturer Part#: |
VE-B4L-CW |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 28V 100W |
| More Detail: | Isolated Module DC DC Converter 1 Output 28V 3.... |
| DataSheet: |  VE-B4L-CW Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 3.57A |
| Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 100W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 28V |
| Voltage - Input (Max): | 100V |
| Voltage - Input (Min): | 55V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic devices that are used to convert electrical energy from one DC voltage to another DC voltage. The VE-B4L-CW is a type of DC-DC converter that is designed to provide a DC output voltage with low ripple and high efficiency. This DC-DC converter is suitable for applications in a wide range of industries, such as automotive, aerospace, power system, consumer electronics, and medical applications.
The VE-B4L-CW is based on a buck-boost topology. The buck-boost topology is one of the most widely used topologies for DC-DC converter applications, as it can provide a DC output voltage with low ripple and high efficiency in both step-up and step-down mode. The VE-B4L-CW converter consists of two power switches, a transformer, an output rectifier, and an auxiliary rectifier. The two power switches are connected in series, and the transformer converts the voltage from the input voltage to the desired output voltage. The output rectifier is used to convert the AC output of the transformer to a DC output. The auxiliary rectifier is used to isolate the output voltage from the input voltage, and to provide additional protection against overvoltage.
The working principle of the VE-B4L-CW is as follows. The input voltage is applied to the primary winding of the transformer, and the secondary winding of the transformer produces an output voltage of the desired magnitude. The two power switches are then turned on and off at a high frequency in order to regulate the output voltage. The output rectifier then rectifies the AC output from the transformer and converts it into a DC output voltage. The auxiliary rectifier is used to provide additional protection against overvoltage, as well as to isolate the output voltage from the input voltage.
The VE-B4L-CW converter is designed for a wide range of industry applications, such as automotive, aerospace, power system, consumer electronics, and medical applications. The converter is capable of providing a regulated DC output voltage with low ripple and high efficiency in both step-up and step-down mode. Additionally, the converter is capable of providing protection against overvoltage, making it an ideal choice for applications in various industries. The VE-B4L-CW converter is a reliable and efficient solution for various DC-DC converter applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...