VE-B4L-EU-S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are used for many different applications. The VE-B4L-EU-S application field and working principle is one such example. It is used for bidirectional power switching and delivers regulated DC output voltage.

The VE-B4L-EU-S is an International Rectifier product and it consists of four pins. The two pins on the left are labeled “Vin” and “Vout” and are used to connect the power source and the load. The other two pins are labeled “GND” and “LC” and they are used to control the device. The device is designed to switch power in both directions, so the voltage at the input and output terminals may be in either polarity.

The VE-B4L-EU-S uses an H-bridge configuration to switch power. The H-bridge consists of two transistors with the source and drain connected together as shown in the diagram below:

The H-bridge allows the direction of the current flow to be reversed. When the LC pin is at logic high, the bridge is in its “on” state. When the LC pin is at logic low, the bridge is in its “off” state. The voltage on the Vout pin is regulated by the internal control circuitry. When the LC pin is at logic high, the internal control circuitry applies a certain voltage to the Vout pin, and the voltage on the Vout pin is regulated. The voltage on the Vout pin is then applied to the load.

The VE-B4L-EU-S can be used in a wide range of applications such as motor control, DC to DC conversion, and battery charging. It is a reliable and efficient device that allows bidirectional power switching and can deliver regulated DC output voltage.

The specific data is subject to PDF, and the above content is for reference