
Allicdata Part #: | VE-B4R-IW-F3-ND |
Manufacturer Part#: |
VE-B4R-IW-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 7.5V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 7.5V 1... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 13.33A |
Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VE-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 7.5V |
Voltage - Input (Max): | 100V |
Voltage - Input (Min): | 55V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are power electronic circuits that allow the conversion of one form of electrical energy to another with lower or higher voltage efficiency. The VE-B4R-IW-F3 DC to DC converter is a high power transfer efficiency converter designed for power engineering projects ranging from a few hundred watts up to and beyond 10kW.
The VE-B4R-IW-F3 converter converts a low voltage DC source into an output with higher or lower voltage, either a constant voltage or a variable voltage. The maximum output is regulated to ensure the purity of the output power. It is a four-section converter, consisting of an input section, two main stages and an output section.
The input section consists of a DC/DC converter, which regulates the input voltage to a lower voltage. A secondary protective stage is then used to prevent any excess input voltage from reaching the output stage. The main stages are the two step-down voltage converters that convert the input voltage to the output voltage.
The VE-B4R-IW-F3 converter has a few distinct features that make it stand out in the field of DC/DC conversion. It has a wide input range, allowing for a variety of input sources such as solar panels or wind turbines. The low current ripple also allows the converter to be used in noise-sensitive applications. Furthermore, the high efficiency of the converter allows for a reduction in power consumption costs.
The output section of the converter consists of a three-phase power converter that is capable of delivering the regulated output voltage. The converter is also capable of handling the high current that the device must supply in order to meet the performance requirements. Additionally, the output section of the converter is designed to provide protection in the event of an overload.
The working principle of the VE-B4R-IW-F3 converter is relatively simple. The converter takes in an input voltage and uses a conversion mechanism, such as a DC/DC converter, to reduce the input voltage. The reduced voltage is then fed into the two main voltage conversing stages, which further reduce the voltage to the desired output. The output is then regulated by using feedback regulation, so that the output voltage is always within the desired range.
The VE-B4R-IW-F3 converter is well suited for usage in power engineering projects, owing to its high power transfer efficiency. The wide input range and low current ripple also allow it to be deployed in noise-sensitive applications. As a result, the VE-B4R-IW-F3 converter is a great choice for anyone looking for a reliable and efficient DC to DC conversion solution.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...

DC DC CONVERTER 12V 240WIsolated Module ...

DC DC CONVERTER 12V 240WIsolated Module ...

DC DC CONVERTER 1.8V 120WIsolated Module...

DC DC CONVERTER 1.8V 120WIsolated Module...

DC DC CONVERTER 1.8V 120WIsolated Module...
