VE-B4W-CU-B1

Current - Output (Max):	36.36A
Size / Dimension:	4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	200W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5.5V
Voltage - Input (Max):	100V
Voltage - Input (Min):	55V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

Power electronics are used in many modern system-level electronic circuits, ranging from consumer electronics to large-scale industrial machines. One of the most important components of any power electronic system is a DC DC converter, which is used to convert irregularly variable AC power sources into steady, regulated DC power levels. The VE-B4W-CU-B1 DC DC converter is a high-quality, eight-pin module designed to provide efficient, low-cost DC output with a wide range of operating voltages. This article will discuss its applications, working principles, and installation considerations.

The VE-B4W-CU-B1 DC DC converter is designed for a wide range of applications where high-quality DC output is desired. It can be used in residential, commercial, and industrial settings to provide regulated DC output without generating unwanted heat or noise. For example, it can be used for powering energy-efficient LED automotive lighting systems, providing reliable energy to the power grid for grid-tied photovoltaic systems, and powering monitoring and control devices in large-scale industrial systems.

The working principles of the VE-B4W-CU-B1 DC DC converter are based on the principle of buck-boost step-down voltage conversion. The device uses a MOSFET switch as its primary component, which is controlled by a PWM signal generated by an internal microcontroller. The process begins with the MOSFET switch being set in an “on” state, which results in a large current being drawn from the input voltage. The MOSFET then switches to an “off” state, allowing the current to be stored in a high-current output inductor. Once the correct output voltage is reached, the MOSFET switch is reset to the “on” state, allowing for the stored energy to be discharged into the output, resulting in a regulated DC voltage. The overall process is designed for efficient conversion, with a minimal amount of power loss.

In short, the VE-B4W-CU-B1 DC DC converter is a high-efficiency, eight-pin module designed for a wide range of DC applications. Its working principles are based on the use of a MOSFET switch controlled by a PWM signal, allowing it to provide efficient and low-cost DC output with a wide range of operating voltages. The module is designed to be easy to install and maintain, and can be a valuable addition to any power electronic system.

The specific data is subject to PDF, and the above content is for reference