| Allicdata Part #: | VE-B53-MX-ND |
| Manufacturer Part#: |
VE-B53-MX |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 24V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 24V 3.... |
| DataSheet: |  VE-B53-MX Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 3.13A |
| Size / Dimension: | 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 24V |
| Voltage - Input (Max): | 200V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are commonly used in a wide range of applications, including industrial, aviation, automotive, and medical. The VE-B53-MX is a type of DC-DC converter specifically designed for industrial, automotive, and medical applications. It is an efficient, isolated, bidirectional, step-up/step-down converter with a wide input voltage range and power range.
The VE-B53-MX is a synchronous, switch-mode DC-DC converter that operates on the buck-boost principle. It can step-up and step down an input voltage from 2.7V-36V to an output voltage of 3.3V-36V. The output current can be set to 24A max.
The VE-B53-MX converter uses a switching converter architecture which comprises of an inductor, an input capacitor, an output capacitor, an output inductor, and MOSFETs. The converter uses a special system design which maintains low operating frequency. Pulling the high-side MOSFET on the rising edge of the clock causes current to be inducted into the inductor, while the low side MOSFET is turned off during the same time. As the inductor saturates, the high side MOSFET is turned off and the low side MOSFET is turned on. The voltage across the inductor then collapses, pushing the current through the output capacitor.
The VE-B53-MX converter supports operating frequencies from 200kHz to 2MHz, allowing for high power conversion and efficiency levels. The main advantage of the VE-B53-MX compared to other DC-DC converters is its extremely low on-time, allowing for higher current and power levels than typically possible with other converters. The VE-B53-MX also features an adjustable output voltage, input overvoltage protection, and short-circuit protection.
The VE-B53-MX converter is an ideal choice for applications such as medical equipment, industrial motor control, factory automation and motion control, LED lighting, power supplies, and other applications requiring a reliable DC-DC converter with excellent efficiency and high power levels.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...