| Allicdata Part #: | VE-B54-IV-F2-ND |
| Manufacturer Part#: |
VE-B54-IV-F2 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 48V 150W |
| More Detail: | Isolated Module DC DC Converter 1 Output 48V 3.... |
| DataSheet: |  VE-B54-IV-F2 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 3.13A |
| Size / Dimension: | 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -40°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 150W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 48V |
| Voltage - Input (Max): | 200V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are devices used to convert direct current (DC) from one voltage level to another. There are many types of DC to DC converters, such as VE-B54-IV-F2, Buck converters, Boost converters, Flyback converters, Push-Pull converters, and so on. Among them, VE-B54-IV-F2 is a full-bridge DC to DC converter, which has been widely used in telecom power system, automotive electronic application and other fields.
The working principle of VE-B54-IV-F2 full-bridge DC to DC converters is relatively simple. Inputting DC voltage to its two sides, this DC-DC converter will activate the four MOSFETs, which will have different control mode according to the user\'s selection. For example, if the user wants to achieve the a steady output voltage, then he can select the Pulse Width Modulation (PWM) control mode for the MOSFETs. In this case, the control mode will modulate the width of the pulse signal to adjust the output voltage. While if the user wants to get a stable output current, then he should choose the Pulse Frequency Modulation (PFM) control mode for the MOSFETs.]
VE-B54-IV-F2 can be widely used in telecom power system, automotive electronics application, storage energy system, and other fields requiring high current output. In telecom power system, this full-bridge DC to DC converter can be used as the output of the power supply, which will output a more stable voltage. Besides, this converter can also be used in automotive electronics application, for instance, it can be used to modulate the current from the battery to other automotive electronics device. Moreover, the VE-B54-IV-F2 can also be used in the storage energy system, for instance, in a combined system of solar cell complex with energy storage device or battery.
To sum up, VE-B54-IV-F2 is a full-bridge DC to DC converter, with simple working principles and numerous application fields. This converter can be used in the telecom power system, automotive electronics application, and storage energy system. Its stable voltage output and high current capacity make it the ideal choice for high power applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...