| Allicdata Part #: | VE-B5N-MV-B1-ND |
| Manufacturer Part#: |
VE-B5N-MV-B1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 18.5V 150W |
| More Detail: | Isolated Module DC DC Converter 1 Output 18.5V ... |
| DataSheet: |  VE-B5N-MV-B1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 8.11A |
| Size / Dimension: | 4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 150W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 18.5V |
| Voltage - Input (Max): | 200V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC to DC converters are widely used electronic components in various applications. They are used to convert direct current from one voltage level to another. In this paper, we will discuss the application field and working principle of the VE-B5N-MV-B1 converter.
VE-B5N-MV-B1 is a type of DC to DC converter, which is widely used in remote control systems, aircraft autopilots, brushless motors, telecommunications, instrumentation, and industrial devices. This type of converter has the advantages of high efficiency, small size, light weight, low cost, good stability, and high reliability. It is capable of delivering up to 20 watts of power, with an output voltage range of 24 to 5 volts.
The VE-B5N-MV-B1 converter works on the principle of switched-mode power conversion. In this type of power conversion, an onboard microcontroller converts an input DC voltage into a higher or lower output DC voltage. This is done by switching the power on and off at a high frequency, so that the output voltage can be greater or less than the input voltage. The microcontroller can also be programmed to adjust the output voltage in order to maintain a constant level of power.
The VE-B5N-MV-B1 converter features an adjustable output voltage trim and a surge current protection circuit. The trim allows the user to adjust the output voltage to meet specific requirements. This is done by simply turning a potentiometer to adjust the output voltage. The surge current protection circuit is designed to protect the converter from damage caused by over-current conditions. The circuit will cut off the power when it senses an over-current situation.
The VE-B5N-MV-B1 converter is a highly reliable and efficient DC to DC converter. It is especially suitable for applications where a highly efficient power conversion is needed. This type of converter is easy to install and operate, making it an ideal choice for a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...