| Allicdata Part #: | VE-B6D-EX-S-ND |
| Manufacturer Part#: |
VE-B6D-EX-S |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 85V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 85V 88... |
| DataSheet: |  VE-B6D-EX-S Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 882mA |
| Size / Dimension: | 4.60" L x 1.80" W x 0.52" H (116.8mm x 45.7mm x 13.2mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 85V |
| Voltage - Input (Max): | 400V |
| Voltage - Input (Min): | 200V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters are electronic power conversion devices, which are used to convert a DC power source into a DC power supply. These converters are usually found in electronic systems like computers, phones, TVs, and other high-end electronics. The most popular type of converter is the VE-B6D-EX-S, which is used in a variety of applications.
The VE-B6D-EX-S is a bidirectional, fully isolated, ultra high frequency DC/DC converter. It has an input voltage range between 5 and 36 volts, and an output voltage between 5 and 50 volts. This converter can provide up to 10A of continuous output current and up to 40A of peak output current. It also features various protection features, such as over voltage, over temperature, and under voltage protection.
The working principle of the VE-B6D-EX-S is based on a synchronous flyback topology. This topology uses a high frequency switching mode power supply with a high switch frequency, typically between 40Khz to 100Khz. The working of the converter is based on the principle of mutual induction, which involves a primary and secondary winding being magnetically coupled. When the primary winding is magnetically switched, the flux induces a current into the secondary winding. The output current at the secondary side is opposite in polarity to the input current at the primary side. This principle allows the converter to convert DC power from a lower voltage into a higher voltage, or vice-versa.
The VE-B6D-EX-S converter is suitable for a wide range of applications, such as in electric vehicles, solar panels, electric scooters, and uninterruptible power supplies. It can also be used as a current regulated power supply for communication systems and other industrial equipment. The converter has a wide input voltage range, as well as an output voltage range, making it versatile in different applications.
The VE-B6D-EX-S is an efficient and reliable power converter for a variety of applications. It is equipped with advanced protection features and has a wide input and output voltage range. As a result, it provides an ideal solution for applications that require a high frequency, bidirectional, isolated DC/DC converter.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...