VE-B6M-EU-F1

Current - Output (Max):	20A
Size / Dimension:	4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-10°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	200W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	10V
Voltage - Input (Max):	400V
Voltage - Input (Min):	200V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters: VE-B6M-EU-F1 Application Field and Working Principle DC-DC converters are commonly used in various industrial applications. They are essential components in energy conversion and power management systems, for example, to convert a high voltage DC power source into lower voltage DC source, to increase DC voltage or current, and to integrate circuits requiring different voltages. The VE-B6M-EU-F1 is a DC-DC converter specifically designed for distributed power systems. This article will discuss the application field and the working principle of the VE-B6M-EU-F1.The VE-B6M-EU-F1 is designed for a wide variety of applications, from charging systems to industrial automation, and is most suited to supply power to multipole distributed systems. It is operated in an open-frame chassis and has a maximum output of 9A, 180W. The input voltage is typically 12-36 Vdc, however this varies depending on model and options. The unit has a wide input voltage range and is designed to operate over a wide temperature range, from -30°C to +70°C. It is also designed to be adjustable, with an adjustable output voltage, current limit and power factor correction.The VE-B6M-EU-F1 is a type of DC-DC buck converter, which converts a higher input voltage to a lower output voltage. This is achieved using a switched-mode power supply (SMPS), where a switching element (usually a MOSFET) is used to control the voltage applied to the load. This switching element is controlled by a PWM (Pulse Width Modulation) signal, which is essentially a digital signal that can be adjusted to vary the switching element\'s on-time. The output voltage is then regulated by changing the PWM, and the speed of the MOSFET switching can be adjusted to increase or decrease the output voltage.The VE-B6M-EU-F1 is also designed with power factor correction, which is essential in modern distributed systems. Power factor correction is achieved by modifying the PWM signal to control the current going into the load, rather than controlling the voltage. This ensures that the output power remains steady, as the voltage follows the PWM signal accordingly.The VE-B6M-EU-F1 is designed with safety features to protect against overload and overvoltage, ensuring that the VE-B6M-EU-F1 can maintain a high level of accuracy and stability even in the most demanding applications. The VE-B6M-EU-F1 is also designed with a high efficiency, allowing it to operate for long periods of time.In conclusion, the VE-B6M-EU-F1 is a versatile and reliable DC-DC buck converter designed for distributed power systems. It is highly adjustable and is designed with power factor correction and safety features to ensure maximum stability and accuracy. It is also designed with a high efficiency, allowing for a long operating life.

The specific data is subject to PDF, and the above content is for reference