VE-B6R-MV-F2

Current - Output (Max):	20A
Size / Dimension:	4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-55°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	150W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	7.5V
Voltage - Input (Max):	400V
Voltage - Input (Min):	200V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are used to convert one type of direct current waveform to another. This can be done for a variety of reasons, ranging from the need for higher voltage or current, to the desire for higher efficiency. The VE-B6R-MV-F2 is an example of a DC-DC converter that can be used for these applications.The VE-B6R-MV-F2 is a high-efficiency, synchronous rectification, dual-mode bi-directional DC-DC converter. It is designed to operate in either buck or boost mode, allowing the output voltage to be greater than, less than, or equal to the input voltage. In buck mode, the input voltage is converted to a lower output voltage, and in boost mode, it is converted to a higher output voltage. It also has dedicated pins for enable signal detection, over-temperature protection, and power good signal detection.The main working principle of the VE-B6R-MV-F2 is to switch between buck and boost mode based on the state of the enable signal. When the enable signal is off, the power stage is disabled, and no power is converted. When the enable signal is on, the power stage is enabled and switches between buck and boost mode depending on the state of the voltage feedback pin. In buck mode, the voltage feedback pin is higher than the reference voltage, and in boost mode, it is lower than the reference voltage.The VE-B6R-MV-F2 is used in a variety of applications such as motor control, battery management, automotive, energy saving and power conditioning. It is also useful for high-side and low-side switchings, providing an efficient and reliable way to switch between different voltages. In addition, the high efficiency of the VE-B6R-MV-F2 makes it suitable for applications that require high accuracy and a low power loss.The VE-B6R-MV-F2 is able to deliver up to 12A peak load current with an input voltage ranging from 4.5V to 40V and an output voltage up to 45V. It also features a wide input voltage range, low standby power, high conversion efficiency up to 95%, and an output ripple below 400mV at 25°C ambient temperature.In conclusion, the VE-B6R-MV-F2 is a high-efficiency, synchronous rectification, dual-mode bi-directional DC-DC converter which is suitable for a variety of applications. It is able to convert one type of DC waveform to another, and can switch between buck and boost mode based on the state of the enable signal. It also offers high efficiency, wide input voltage range, low power loss, and high accuracy.

The specific data is subject to PDF, and the above content is for reference