Allicdata Part #: | VE-B6V-IW-B1-ND |
Manufacturer Part#: |
VE-B6V-IW-B1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.8V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.8V 1... |
DataSheet: | VE-B6V-IW-B1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 17.24A |
Size / Dimension: | 4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VE-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.8V |
Voltage - Input (Max): | 400V |
Voltage - Input (Min): | 200V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters which use VE-B6V-IW-B1 are housed in an extremely small package and have a wide range of capabilities. It is able to convert a low voltage supply to a higher one with isolated power input and output. It is also capable of operating without an external heatsink, and in conjunction with its built-in protection functions, these features make it ideal for the design of small, cost effective power supplies.
The VE-B6V-IW-B1 converter is based on a forward voltage conversion topology. It uses an inductor, two MOSFETs, diodes, capacitors, and a compensation network to transform a low DC input voltage to a higher output voltage. This series of converters provide efficient power conversion and high performance in a compact form factor.
The power flow in the VE-B6V-IW-B1 converter is regulated by an internal error amplifier, which controls the duty cycle of the two MOSFETs. This error amplifier is connected to a voltage feedback loop in order to keep the output voltage stable. When the output voltage falls, the duty cycle of the two MOSFETs is increased, and vice versa, resulting in a regulated output voltage.
The two MOSFETs are triggered using a pulse width modulator (PWM) that is provided with a signal at a frequency of 500kHz. At this frequency, the circuit is able to provide a nearly constant output voltage despite changes in the load. Furthermore, this frequency is often low enough to eliminate any acoustic noise generated by the converter.
Protection functions are integrated into the VE-B6V-IW-B1 converter to ensure safe operation. Over-temperature protection is achieved by monitoring an internal temperature sensor. Over-voltage and under-voltage protection is provided by a voltage monitoring circuit, while short circuit protection is provided by a current sensing circuit.
The VE-B6V-IW-B1 is ideal for applications such as distributed power systems, medical equipment, communication systems, and industrial control systems. Its ability to provide a high output voltage from a low input voltage, along with its excellent efficiency and versatile protection functions, make it a popular choice for these and other applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...