| Allicdata Part #: | VE-B71-CY-S-ND |
| Manufacturer Part#: |
VE-B71-CY-S |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 12V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 12V 4.... |
| DataSheet: |  VE-B71-CY-S Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 4.17A |
| Size / Dimension: | 4.60" L x 1.80" W x 0.52" H (116.8mm x 45.7mm x 13.2mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 12V |
| Voltage - Input (Max): | 375V |
| Voltage - Input (Min): | 100V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic circuits that can convert a DC voltage to a different DC voltage. The VE-B71-CY-S is one such converter, and it is designed to step down a higher voltage input into a lower voltage output. It is ideal for applications such as solar photovoltaic (PV) panels, battery charging, audio amplifiers, and power supplies.
The VE-B71-CY-S is a highly efficient, low cost, and high power DC DC converter. It has a wide input voltage range of 10~30V and a constant output voltage of 5V and 10A current output. The device is housed in a small, 10.2 x 5.7mm surface mount package for easy integration. It features a switching frequency of up to 500kHz and switching loss of less than 15mW, making it one of the most efficient DC-DC converters on the market today.
The working principle of the VE-B71-CY-S DC DC converter is based on a buck converter topology. It uses the principle of pulse width-modulation (PWM) to regulate the output voltage of the circuit. In this type of regulator, the input voltage is compared to the setpoint voltage and an error difference is generated. This error difference is then converted into a pulse width modulation signal, which is used to control the switch within the circuit. The switch is responsible for regulating the output voltage, and it is the key to the converter\'s efficiency.
The VE-B71-CY-S DC DC converter is designed to be used in applications where very low power is needed, such as solar applications. The device is very efficient, with a high conversion efficiency of up to 98%. It also features a very low ripple voltage, which ensures a stable output voltage even under varying input voltages. The device is also very reliable and is protected against overvoltage, overcurrent, and overtemperature conditions.
The VE-B71-CY is a highly efficient and cost-effective DC-DC converter that is suitable for a wide range of applications. It provides a reliable and stable output voltage, with a high conversion efficiency and a low ripple voltage. The device is also protected against overvoltage, overcurrent, and overtemperature conditions. It is ideal for use in solar PV applications, audio amplifiers, and power supplies.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...