| Allicdata Part #: | VE-BNX-CX-B1-ND |
| Manufacturer Part#: |
VE-BNX-CX-B1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 5.2V 75W |
| More Detail: | Isolated Module DC DC Converter 1 Output 5.2V 1... |
| DataSheet: |  VE-BNX-CX-B1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 14.42A |
| Size / Dimension: | 4.60" L x 2.40" W x 1.07" H (116.8mm x 61.0mm x 27.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 75W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 5.2V |
| Voltage - Input (Max): | 76V |
| Voltage - Input (Min): | 36V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to DC DC Converters
DC DC converters are devices used to convert a higher voltage direct current (DC) signal to a lower voltage DC signal. They are used in a variety of applications, including electronic equipment, automotive applications, and consumer electronics. DC DC converters are available in a variety of configurations, such as step-up, step-down, and synchronous boost converters.
VE-BNX-CX-B1 Application Field and Working Principle
The VE-BNX-CX-B1 is a high efficiency DC-DC converter designed for a variety of low power applications. It is a step-down buck converter with a wide input voltage range of 6 to 36V and a wide output voltage range of 0.6V-5.5V. The device is designed to provide a high level of power conversion accuracy and efficiency. It is available in a small, surface-mount form factor and can be configured with integrated protection features for safe operation.
The VE-BNX-CX-B1 DC-DC converter works by converting a higher voltage DC signal to a lower voltage DC signal. The device works by using an inductor to store energy, which is then released in a controlled fashion to achieve the desired output voltage. The device is equipped with an on-board controller that is used to regulate the output voltage and current. The controller also features integrated protection features, such as over-temperature protection, over-voltage protection, and under-voltage lockout.
The VE-BNX-CX-B1 DC-DC converter is ideal for low power applications, such as mobile phone chargers and laptop adapters. It is also suitable for automotive applications, including 12V to 6V converters for powering cameras and audio systems. The device is also suitable for battery-powered consumer electronics, such as wearable devices and personal audio players.
Conclusion
The VE-BNX-CX-B1 DC-DC converter is a high efficiency, low power device designed for a variety of applications. It is a step-down buck converter with a wide input and output voltage range and integrated protection features. The device is ideal for a variety of low power applications, such as mobile phone chargers, laptop adapters, automotive applications and battery-powered consumer electronics.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...