VE-BT0-IX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are widely used in a variety of applications, especially for providing power for battery-operated devices. One such converter is the VE-BT0-IX. This converter is a non-isolated buck switching regulator, meaning that it is a step-down voltage converter that converts input voltage into a lower output voltage with minimal power loss.

The basic design of the VE-BT0-IX consists of a full bridge rectifier, a Schottky diode, a buck switch, and a series of capacitors and inductors. The input voltage is provided to the full bridge rectifier, which in turn rectifies it into a dc voltage. This DC voltage is then sent through the buck switch, which alternately opens and closes in response to a control signal. When the switch is open, current flows through the inductor, producing a magnetic field which stores energy. When the switch is closed, the magnetic field collapses, producing a voltage which is then sent through the diode to the output. The output of the converter is a voltage which is lower than the input, but is of the same type.

The performance of the VE-BT0-IX is relatively good. Output voltage regulation is typically within 2%, with a maximum of 4%. The output ripple voltage is usually less than 25mV, and the power efficiency is typically around 95%. Additionally, the converter can handle transient overvoltages of up to 800V, which makes it useful in many low-voltage, high-energy applications such as motor control.

The VE-BT0-IX is a simple and efficient step-down DC-DC converter with good performance characteristics. It is widely used in a variety of applications, including motor control and battery-operated devices. Because of its high power efficiency and low output ripple voltage, it is an ideal choice for many low-voltage applications.

The specific data is subject to PDF, and the above content is for reference