| Allicdata Part #: | VE-BT1-EV-S-ND |
| Manufacturer Part#: |
VE-BT1-EV-S |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 12V 150W |
| More Detail: | Isolated Module DC DC Converter 1 Output 12V 12... |
| DataSheet: |  VE-BT1-EV-S Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 12.5A |
| Size / Dimension: | 4.60" L x 1.80" W x 0.52" H (116.8mm x 45.7mm x 13.2mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 88% |
| Operating Temperature: | -10°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 150W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 12V |
| Voltage - Input (Max): | 160V |
| Voltage - Input (Min): | 66V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are a type of power electronics components which are used to convert direct current (DC) from one voltage level to another. The VE-BT1-EV-S application field and working principle is a type of DC-DC converter which is mainly used for interactive multimedia, automotive electronics, industrial control, and telecommunication applications. It provides a reliable, low cost, and efficient solution for DC power supply.
VE-BT1-EV-S Application Field and Working Principle
VE-BT1-EV-S is a type of DC-DC converter which uses Buck switching technology. It is the most efficient type of DC-DC converter, and it offers a wide input voltage range and a highly regulated output voltage. The input voltage range is from 6V to 40V and the output voltage range is from 0.8V to 5V. The maximum load current of this converter is 5A, and its efficiency is up to 95%.
The working principle of the VE-BT1-EV-S converter is that the input voltage is rectified by an input rectifier, which converts the AC input voltage into a DC voltage. Then the rectified voltage is filtered by a filter capacitor, and an on-chip current limit circuit limits the input current to an appropriate level. Finally, the filtered and current limited voltage is supplied to a switching transistor, which is connected to a feedback voltage system. This feedback voltage system adjusts the switching transistor pulse width (PWM).
The adjustment of PWM determines the output voltage of the VE-BT1-EV-S converter. A load connected to the output voltage port will draw the current, according to Ohm\'s law. The switching transistor transforms the filtered and current limited voltage into an alternating voltage which is converted by a voltage regulator into a voltage suitable for the load connection. The output power of the VE-BT1-EV-S converter is determined by the input voltage and output current, and its efficiency is also affected by the input voltage and output current.
VE-BT1-EV-S is a highly stable, low cost, and highly efficient DC-DC converter and it is mainly used in interactive multimedia, automotive electronics, industrial control, and telecommunication applications. It provides a reliable, low cost, and efficient solution for DC power supply.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...