VE-BT3-CX-F2 Allicdata Electronics
Allicdata Part #:

VE-BT3-CX-F2-ND

Manufacturer Part#:

VE-BT3-CX-F2

Price: $ 0.00
Product Category:

Power Supplies - Board Mount

Manufacturer: Vicor Corporation
Short Description: DC DC CONVERTER 24V 75W
More Detail: Isolated Module DC DC Converter 1 Output 24V 3....
DataSheet: VE-BT3-CX-F2 datasheetVE-BT3-CX-F2 Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Current - Output (Max): 3.13A
Size / Dimension: 4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)
Package / Case: Full Brick
Mounting Type: Through Hole
Efficiency: 90%
Operating Temperature: -25°C ~ 85°C
Features: OCP, OTP, OVP, SCP
Applications: ITE (Commercial)
Voltage - Isolation: 3kV
Power (Watts): 75W
Series: VE-200™
Voltage - Output 3: --
Voltage - Output 2: --
Voltage - Output 1: 24V
Voltage - Input (Max): 160V
Voltage - Input (Min): 66V
Number of Outputs: 1
Type: Isolated Module
Part Status: Active
Packaging: Bulk 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

A DC/DC power converter is an electrical device used to transfer electrical energy from one voltage or power level to another. It can convert a direct current (DC) source to a different DC level, or even provide a combined AC and DC source. Power converters are one of the most widely used components in the electronics industry.

VE-BT3-CX-F2 is a DC to DC converter used in applications such as personal computers, automotive electronics, communication equipments and medical devices. The converter is capable of providing a wide range of output voltages ranging from 0.3V to 5V with high accuracy. The device is designed to operate in both step-down and buck-boost configurations.

The working principle of VE-BT3-CX-F2 DC/DC converter is based on switching regulators. It uses an internal MOSFET switch to convert an input voltage into a regulated output voltage. The regulator uses a PWM (Pulse Width Modulation) control loop to set the duty cycle of the switch. The output voltage is determined by the on-time of the switch.}

The input voltage is stepped down by a high frequency high-power transformer which is controlled by the PWM signal of the internal circuit. The output voltage is filtered and regulated by an output voltage regulator. The switching duty cycle is set by the feedback signal from the output voltage regulator. The output voltage can be adjusted by potentiometer.

The oscillating frequency of the converter is programmable. This feature enables the design of low-voltage power supplies with high efficiency, which is essential for energy saving applications. Additionally, the converter is designed to protect devices with soft-start, over current and temperature protection.

In conclusion, the VE-BT3-CX-F2 DC/DC converter is a high performance, stable and reliable converter. Its working principle is based on a switching regulator mechanism and allows for a wide input and output voltage range. The device offers protection against over-currents and temperature variations, and has a programmable oscillating frequency.

The specific data is subject to PDF, and the above content is for reference

Latest Products
AEQ20B48N-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48N-6L Allicdata Electronics
AEQ20B48-L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-L Allicdata Electronics
AEQ20B48-6L

DC DC CONVERTER 12V 240WIsolated Module ...

AEQ20B48-6L Allicdata Electronics
AEO40Y48N-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48N-6L Allicdata Electronics
AEO40Y48-L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-L Allicdata Electronics
AEO40Y48-6L

DC DC CONVERTER 1.8V 120WIsolated Module...

AEO40Y48-6L Allicdata Electronics