![VE-BTF-CX-F3 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
Allicdata Part #: | VE-BTF-CX-F3-ND |
Manufacturer Part#: |
VE-BTF-CX-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 72V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 72V 1.... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 1.04A |
Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
Package / Case: | Full Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 85°C |
Features: | OCP, OTP, OVP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VE-200™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 72V |
Voltage - Input (Max): | 160V |
Voltage - Input (Min): | 66V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are used to convert electricity from a lower voltage DC input to a higher voltage DC output. They are useful in applications such as motor control, equipment monitoring, lighting, industrial control and other applications requiring a DC voltage conversion. The most commonly used type is the Voltage-Boost Transformer-Charge Exchanger Type (VE-BTF-CX-F3).
The VE-BTF-CX-F3 converter consists of a step-down transformer, boost circuit, inverter, and a switching circuit. The transformer reduces the voltage from the input source. The boost circuit charges a capacitive filter and stores energy from the input. The inverter step-up the voltage to the required output voltage. The switching circuit regulates the input to maintain the output voltage. The entire system is protected by a fuse.
The operation of the VE-BTF-CX-F3 converter is as follows. The input voltage is first stepped down by the transformer, and then the boost circuit starts and stores energy in the filter. The inverter then step up the voltage from the output of the filter, and the switching circuit regulates the output voltage. The output is then stabilized and protected with an overload protection device.
The VE-BTF-CX-F3 converter is used in various applications. It is widely used in industrial control systems for motor control, process control, equipment monitoring and lighting. It is also used in automotive applications for controlling the electrical system in cars. The converter is also used in renewable energy applications, such as solar and wind power, as well as other applications requiring a stable DC voltage.
The VE-BTF-CX-F3 converter is a reliable and cost effective solution for applications which require a stable DC voltage at higher voltages. The power conversion process is efficient, as it allows for a safe and reliable operation. The use of the converter is increasing in industrial and automotive applications due to its reliability and cost-effectiveness.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
![AEQ20B48N-6L Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
DC DC CONVERTER 12V 240WIsolated Module ...
![AEQ20B48-L Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
DC DC CONVERTER 12V 240WIsolated Module ...
![AEQ20B48-6L Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
DC DC CONVERTER 1.8V 120WIsolated Module...
![AEO40Y48N-6L Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
DC DC CONVERTER 1.8V 120WIsolated Module...
![AEO40Y48-L Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
DC DC CONVERTER 1.8V 120WIsolated Module...
![AEO40Y48-6L Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)