VE-BTL-IW

Current - Output (Max):	3.57A
Size / Dimension:	4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-40°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	28V
Voltage - Input (Max):	160V
Voltage - Input (Min):	66V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters have been a staple of the power supply industry since their introduction in the late 1970s. They are used to convert a DC voltage, typically supplied by batteries or utility grids, to a higher or lower level of voltage by using switching elements and capacitors or inductors. This conversion can be used to regulate a power supply in a variety of applications. DC-DC converters also enable the use of multiple power sources, such as solar cells or fuel cells, to be connected in series and parallel to a single output.One type of DC-DC converter is the VE-BTL-IW converter. This type of converter is used primarily in the power supply industry and is typically found in computer systems, mobile phones, and other electronic devices. The VE-BTL-IW converter is typically a two-stage converter composed of a buck or boost type of switched mode power supply (SMPS) and an inverter stage.The VE-BTL-IW converter has two main components: the buck-boost regulator and the inverter stage. The buck-boost regulator is designed to regulate the current passing through it by using the voltage of the input line. It is designed to accept current from either a higher or lower voltage input. The inverter stage inverts and boosts the output of the buck-boost regulator to acheive the required output voltage.The working principle of the VE-BTL-IW converter is relatively simple. It takes advantage of the differences in the input voltages of a battery or power grid and outputs a regulated voltage depending on the load. The converter uses a switching element, typically a MOSFET, to convert the input signal into either a buck or boost type of switched mode power supply (SMPS). The SMPS can then be further regulated to achieve the desired output voltage.The VE-BTL-IW converter has a variety of uses in the power supply industry. One of the most common applications for the VE-BTL-IW converter is in laptop computers. The converter is used to convert a 12V battery input to the needed 19V output for the laptop. It is also used in mobile phones to convert the 3.7V battery output into a 5V supply for the phone’s electronics. The VE-BTL-IW converter can also be used to power DC motors and other electronic devices.The VE-BTL-IW converter is a reliable and efficient converter that offers power supply designers great flexibility when designing a system. It is used extensively in the power supply industry and is a key component in systems that require multi-voltage outputs. The VE-BTL-IW converter has been proven to be a reliable and efficient device, and is sure to remain a staple in the power supply industry for many years to come.

The specific data is subject to PDF, and the above content is for reference