VE-BTN-CX-F2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are electronic devices used for converting direct current from one voltage level to another. The converter is based on Switching DC to DC regulators, which convert the input voltage at one level to the desired voltage output. This is achieved by using a system of transistor switches that control how the current is routed. These devices, such as the VE-BTN-CX-F2, are designed to reduce the power loss, output voltage, and temperature characteristics of the converter.The basic function of the VE-BTN-CX-F2 is to convert a direct current source into a constant voltage output. It is an ideal choice for applications requiring high output voltage accuracy, low noise, high efficiency, and low ambient temperature. The device is a regulated unit with a fast response time and provides good overall performance.The converter has four Basic Power Modes, including a Constant Voltage Mode (CVM), a Constant Current Mode (CCM), a Variable Voltage Mode (VVM), and a Variable Frequency Mode (VFM). In the CVM, the output voltage is set to a specific level and the converter will provide the necessary current to be able to maintain that voltage. In the CCM, the output current is set to a specific limit but the output voltage is allowed to vary. The VVM mode allows for the output voltage to be adjusted depending on the demand and the VFM mode allows the output frequency to be adjusted.The VE-BTN-CX-F2 is highly efficient with low input current and low power losses. The device has a wide input voltage range which can be adjusted from a minimum of 5V all the way up to 40V. The output voltage is adjustable with a range from 5V to 70V.The converter has several control options, such as the Soft-start, Burst-Mode, and Stand-by/Under-voltage Lockout. The soft-start allows the output voltage to gradually rise up to the desired level. The Burts-Mode is used to reduce the ripple at lower loads while Stand-by/Under-voltage Lockout can be used to prevent the device from going into an over-voltage condition if the input voltage is too low.The VE-BTN-CX-F2 is a highly efficient DC to DC converter with a wide input voltage range and adjustable output voltage. It is capable of providing a constant voltage and current output for a wide range of applications, such as mobile phones, laptop computers, and other consumer electronics. The device is also capable of responding quickly to changing load conditions and provides excellent performance in both low and high input voltages.

The specific data is subject to PDF, and the above content is for reference