VE-BTN-CX-F4

Current - Output (Max):	4.05A
Size / Dimension:	4.60" L x 1.86" W x 1.05" H (116.8mm x 47.2mm x 26.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-25°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	18.5V
Voltage - Input (Max):	160V
Voltage - Input (Min):	66V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC converters are widely used in industrial, commercial, residential and military power applications. They convert direct current (DC) power from one voltage level to another. The most common version of a DC to DC converter is the VE-BTN-CX-F4, which is a four-phase converter used to step-up or step-down voltage levels while maintaining a regulated output voltage.The VE-BTN-CX-F4 is capable of converting up to 400 amps from an input voltage of between 175 volts and 400 volts down to a safe voltage of between 6 volts and 5 volts. Typically, these converters are used in power distribution systems for complex industrial automation processes.The VE-BTN-CX-F4 uses four transformer-based switching phases to regulate the output voltage. The first phase steps up the voltage from the input to the intermediate voltage. The second phase then uses a series of transistors, diodes and capacitors to regulate this intermediate voltage. The third phase regulates the current draw and the fourth phase provides the output voltage to the load component. The VE-BTN-CX-F4 converter is also configured with a soft-start system, which is designed to reduce the surges and voltage fluctuations associated with large loads. The soft-start system increases the load slowly until the desired output voltage is reached. This prevents damage to the output load due to the sudden burst of voltage.In addition to the soft-start system, the VE-BTN-CX-F4 also features a built-in safety system. This feature helps to protect against faults and system failures, such as overvoltage or low voltage conditions. The safety system can be configured with various settings, such as current, voltage, power, thermal, and environmental.The VE-BTN-CX-F4 converter is an efficient, reliable and cost-effective power source that is ideal for industrial power applications. It offers high efficiency, low idle and startup losses, wide efficiency curves, and low input-output voltage tolerances. It can also be customized for multiple input voltages, output voltages, and load resistances. In summary, the VE-BTN-CX-F4 DC to DC converter is an ideal solution for industrial and commercial applications that require a reliable and efficient power source. It is designed to be energy efficient and provide the highest levels of safety and control. With its multiple features such as built-in safety system, four-phase operation, and soft-start system, the VE-BTN-CX-F4 is an ideal power source for many industrial settings.

The specific data is subject to PDF, and the above content is for reference