VE-BW4-EV

Current - Output (Max):	3.13A
Size / Dimension:	4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	88%
Operating Temperature:	-10°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	150W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	48V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC/DC Converters: VE-BW4-EV Application Field and Working Principle

DC/DC converters are electronic components used to convert DC power sources, such as batteries and solar cells, into higher or lower levels of power. The VE-BW4-EV is a type of DC/DC converter commonly available on the market. It is an efficient, highly reliable, and cost-effective device that is typically found in consumer and industrial applications.The VE-BW4-EV is designed for use in high-density space-constrained applications, such as motor control, inverter, and transformer management in automotive, aerospace, and consumer electronics. This converter has an input voltage range of 4 V to 40 V, and it is rated for 5 A continuous current from its output voltage range of 0.8 V to 26 V with up to 95 percent efficiency. This converter operates on a switching basis, allowing it to switch different voltage levels very rapidly.The VE-BW4-EV is an example of a buck-boost converter. Buck-boost converters are capable of taking an input voltage that is either higher or lower than the desired output voltage and converting it to the desired level. The VE-BW4-EV uses a high-frequency Pulse Width Modulation (PWM) method to convert the input voltage to the desired output voltage. The PWM method employs a feedback loop consisting of an internal error amplifier and a voltage reference to monitor the output voltage. When the output voltage falls below the reference voltage, the feedback loop turns on the upper switch of the converter to increase the output voltage. When the output voltage exceeds the reference voltage, the feedback loop turns on the lower switch of the converter to decrease the output voltage. In this way, the converter can continuously monitor and control the output voltage. The VE-BW4-EV is also designed with several safety features. It features over-voltage, under-voltage, and over-temperature protection to ensure that it won’t suffer any damage as a result of an extreme condition. The device also features a soft-start circuitry that reduces the in-rush current of the converter when it is first powered on, which reduces the risk of system damage and ensures the efficient operation of the converter.Overall, the VE-BW4-EV DC/DC converter is an efficient and reliable device that is designed to last. Its robust design and numerous safety features make it suitable for a wide range of applications, especially those with space constraints. The device is highly configurable, allowing for wide input and output ranges and a wide range of operating frequencies. As a result, it is a great choice for any application that requires flexible and reliable power conversion.

The specific data is subject to PDF, and the above content is for reference