| Allicdata Part #: | VE-BWK-CY-F1-ND |
| Manufacturer Part#: |
VE-BWK-CY-F1 |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 40V 50W |
| More Detail: | Isolated Module DC DC Converter 1 Output 40V 1.... |
| DataSheet: |  VE-BWK-CY-F1 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 1.25A |
| Size / Dimension: | 4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm) |
| Package / Case: | Full Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -25°C ~ 85°C |
| Features: | OCP, OTP, OVP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 50W |
| Series: | VE-200™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 40V |
| Voltage - Input (Max): | 36V |
| Voltage - Input (Min): | 18V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC Converters are used to convert a dc power source to another dc power source with a different voltage level. Electrical switches are used to control the voltage level by connecting and disconnecting the power source from the load. The most commonly used DC-DC converter is the VE-BWK-CY-F1 converter. This DC-DC Converter has been used for many years in industrial, aerospace, and automotive applications.
The VE-BWK-CY-F1 DC-DC Converter is a half-bridge converter. It uses two electrical switches to connect and disconnect the electrical load from the dc power source. The switches are typically N-channel MOSFETS or IGBTs. The switching frequency of the converter is typically in the range of 10-20 kHz. The VE-BWK-CY-F1 converter is current mode control, which means the output voltage is adjusted based on the current drawn by the load. The output voltage is then regulated and stabilized by a voltage feedback loop.
The VE-BWK-CY-F1 converter is most often used in applications where a high power voltage is required. The converter can handle power levels ranging from 10 watts to 1000 watts. It is also capable of high step-up and step-down voltage ratios of up to 8:1, allowing the converter to be used in a wide variety of applications. Many automotive, industrial, and aerospace applications use the VE-BWK-CY-F1 converter due to its wide range of input voltages and power capabilities.
The converter also has built-in protection features such as over-current, over-voltage, short-circuit, and thermal protection. These features ensure the safety of the converter and the load in case of a fault condition. The converter also has a variety of control inputs and status pins which can be used to communicate with other control systems. This makes the converter easy to control and monitor for a variety of applications.
The VE-BWK-CY-F1 is a high power, high efficiency DC-DC Converter. It is an ideal solution for applications that require a wide range of power levels and high voltage ratios. The converter is also very reliable and has built-in protection features to ensure the safety of the load. The wide range of control inputs and status pins also make it easy to control and monitor for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...