VE-BWT-IW-F3

Current - Output (Max):	15.38A
Size / Dimension:	4.60" L x 1.86" W x 0.79" H (116.8mm x 47.2mm x 20.1mm)
Package / Case:	Full Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-40°C ~ 85°C
Features:	OCP, OTP, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	100W
Series:	VE-200™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	6.5V
Voltage - Input (Max):	36V
Voltage - Input (Min):	18V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to DC DC ConvertersTodays’ electronics are all powered by DC DC Converters, which are responsible for converting electrical energy from one form to another, typically from DC to AC. DC DC Converters are used in a variety of applications such as automotive, industrial, medical, and consumer electronics, and can be used to transform a voltage or current from one form or value to another.VE-BWT-IW-F3 Application field and working principleThe VE-BWT-IW-F3 is a DC DC converter, specifically, a three-phase boost converter used in a variety of applications. It is mainly used to convert low-voltage inputs into higher-voltage outputs, often in the range of 120 to 500V, at frequencies up to 1000 Hz.The VE-BWT-IW-F3’s three-phase boost converter is composed of three MOSFETs, three synchronous rectifiers, one main power switch, two pre-charge resistors, a current sensing resistor, and a free-running synchronous rectifier. The entire circuit is controlled by the main power switch. During operation, the solenoid is turned on and off to ensure the proper voltage and current levels.In order to regulate the power output of the converter, there is an integrated current sensing resistor that senses and regulates the current outputs from the boost converter. In addition, the pre-charge resistors are used to reduce the inrush current and ensure a smooth start-up of the converter.The main advantage of the VE-BWT-IW-F3 converter is its high power density and output power. It has a power density of up to 94 watts per cubic centimeter and a power output of up to 2200 W. It also has a low EMI, allowing it to be used in a variety of applications.ConclusionThe VE-BWT-IW-F3 is a three-phase boost converter, used in a variety of application fields, primarily in automotive, industrial, medical, and consumer electronics. Its main advantage is its high power density and output power, with a power density of up to 94 watts per cubic centimeter and a power output of up to 2200 W. Its integrated current sensing resistor allows the efficient regulation of the output power while the pre-charge resistors reduce the inrush current and ensure a smooth start-up of the converter.

The specific data is subject to PDF, and the above content is for reference