VE-BWT-MX-F1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are devices that convert DC power from one voltage source to another. The most commonly used DC-DC converters are switch mode power supplies (SMPS). DC-DC converters can also be used in solar or wind energy systems. Many of these DC-DC converters are used in the automotive industry and also in consumer electronics.

VE-BWT-MX-F1 is a two-phase single-source DC-DC converter based on Single-Switch Buck-Boost technology. It provides –20V to +20V output voltages as well as operating at 1MHz. This converter is usually used in low-voltage/ high current applications such as automotive, industrial, and consumer electronics markets.

The working principle of VE-BWT-MX-F1 is based on a switching DC-DC converter design. The converter consists of an input section, an output section and an energy storage section. The input section is made up of the primary switch which is a MOSFET, capacitor and diode. The output section is composed of an inductor, output filter and output rectifier. The energy storage section is made up of an inductor, transformer and capacitor

The input circuit is responsible for providing an alternating supply of current to the primary switch. The input voltage is stepped down to a lower voltage, depending on the difference between the two voltages. The resulting power is stored in a capacitor, which is then used to drive the primary switch.

The output section of the converter receives the converted power from the input section and rectifies it to the desired output voltage. The output voltage is filtered by a low pass filter before being sent to the load. The energy storage section is used to store the excess energy when the output voltage is greater than the input voltage.

VE-BWT-MX-F1 DC-DC converter has a wide range of applications. It can be used for automotive systems, industrial systems, consumer electronics, and other high current/low voltage applications. It is ideal for use in applications that require high efficiency, low voltage conversion, as well as a small form factor.

In summary, VE-BWT-MX-F1 is a two-phase single-source DC-DC converter based on Single-Switch Buck-Boost technology. It provides –20V to +20V output voltages as well as operating at 1MHz and is mainly used in low-voltage/high current applications. The converter is composed of an input section, an output section and an energy storage section. It is ideal for use in applications that require high efficiency, low voltage conversion, as well as a small form factor.

The specific data is subject to PDF, and the above content is for reference