VE-BWW-IX-F4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electrical circuits or electronic components used to convert electric power obtained from a DC (direct current) supply to another voltage level that is suitable for other applications. A common example of a DC-DC converter is the VE-BWW-IX-F4 application field and working principle.

VE-BWW-IX-F4 consists of a standard DC-DC converter topology which involves a switch and an inductor. It contains two identical buck-boost converter ICs that are contained in one package. This configuration uses a common ground connection between the input and the output, and enables both buck and boost mode operation.

The application field of VE-BWW-IX-F4 has a wide range of uses, including Telecom, Automotive and Datacom, as it can handle a variety of input and output voltages. The device provides an efficient step-up or step-down voltage conversion with high power efficiency and low noise. It is suitable for applications that require a small size as the VE-BWW-IX-F4 operates in a small, low-profile package.

The purpose of the VE-BWW-IX-F4 is to provide DC voltage conversion from an input of either 6.5V to 34V or 30V to 60V to an output voltage of 5V or 3.3V. The device is rated for 2A of DC current, which is sufficient for powering most small electronic devices.

The working principle of the VE-BWW-IX-F4 device is based on the buck-boost topology. The buck-boost topology is a DC to DC converter design which is powered by a DC input voltage, and provides either buck or boost operation depending on the output voltage. In buck mode operation, the device accepts a higher input voltage than the required output voltage and provides the output voltage through a voltage reduction technique. In boost mode operation, the device accepts a lower input voltage than the required output voltage and supplies the output voltage by a voltage increase technique.

The operating principle of the VE-BWW-IX-F4 can be understood by studying the internal components of the device. The device contains two integrated buck converter ICs, which are responsible for the buck mode operation of the device. The two buck converter ICs are connected in parallel, with each having its own output inductor and switch. The two inductors are connected in series as they are the only components in the circuit which store energy. As the current flows through the inductor, it causes an increase in the voltage. When the voltage reaches the desired output voltage, the switch is then opened, and the current is drawn from the output capacitor to provide the necessary output voltage.

The device also contains two integrated boost converter ICs, which are responsible for the boost mode operation of the device. In this mode, the input voltage is less than the desired output voltage. The two boost converter ICs are connected in series, with each having its own input inductor and switch. As the current flows through the inductor, it causes a decrease in the voltage. When the voltage reaches the desired output voltage, the switch is then closed, and the current is drawn from the input capacitor to provide the necessary output voltage.

Overall, the VE-BWW-IX-F4 DC-DC converter is capable of providing efficient step-up or step-down voltage conversion with high power efficiency and low noise. Its wide range of applications, such as Telecom, Automotive and Datacom, make it suitable for powering most small electronics. The working principle of the device is based on the buck-boost topology, which operates in buck and boost mode depending on the input and output voltages, and it contains two integrated buck and boost converter ICs.

The specific data is subject to PDF, and the above content is for reference