Allicdata Part #: | VE-J0P-IY-B1-ND |
Manufacturer Part#: |
VE-J0P-IY-B1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 13.8V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 13.8V ... |
DataSheet: | VE-J0P-IY-B1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 3.62A |
Base Part Number: | VE-J0P |
Size / Dimension: | 2.36" L x 2.28" W x 1.08" H (59.9mm x 57.9mm x 27.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 13.8V |
Voltage - Input (Max): | 20V |
Voltage - Input (Min): | 10V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic circuits used to convert a DC voltage from one level to another. They are commonly used in telecommunications, computer systems, renewable energy systems, and automotive applications. There are several types of converters, and the most common ones are the VE-JOP-IY-B1 converters. These are switching converters, and their primary purpose is to step down or step up the voltage of a power source depending on what is required.
The VE-JOP-IY-B1 converter is made up of a number of components, including a transformer, rectifier, and voltage regulation. The transformer is used to convert the voltage of the power source to the desired level. The rectifier is used to convert the AC voltage from the transformer to DC voltage, and the voltage regulation circuit is used to maintain constant output voltage. The VE-JOP-IY-B1 converter is designed to be highly efficient, and it consumes very little energy compared to traditional power supplies.
The VE-JOP-IY-B1 converter is mainly used in applications that require a wide range of output voltages. For example, it is often used in equipment that needs to be powered from batteries as well as from the mains. This is because the VE-JOP-IY-B1 converter can provide power at various levels depending on the requirements of the application. For example, it can be used to provide a low voltage for the components of a computer and a high voltage for the component that is used to supply the main power.
The VE-JOP-IY-B1 converter works on the principle of pulse-width modulation or PWM. PWM works by rapidly switching the output voltage between a high and low level in a predetermined frequency and duty cycle. This produces a “carrier wave” on the output which can then be modulated and used to produce higher or lower output voltages. This is a simpler and more efficient way of producing different output voltages than traditional methods.
The VE-JOP-IY-B1 converter is a highly efficient and reliable power solution suitable for a variety of application fields. It is widely used in telecommunications, consumer electronics, automotive, and renewable energy systems. It is simple and easy to use, and its low cost and high efficiency make it an attractive alternative to traditional power solutions.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...