Allicdata Part #: | VE-J0T-MZ-F4-ND |
Manufacturer Part#: |
VE-J0T-MZ-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 6.5V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 6.5V 3... |
DataSheet: | VE-J0T-MZ-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 3.85A |
Base Part Number: | VE-J0T |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -55°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 6.5V |
Voltage - Input (Max): | 20V |
Voltage - Input (Min): | 10V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic circuits that convert direct current (DC) from one voltage level to either the same or another voltage level. The VE-J0T-MZ-F4 converter is an offline buck-boost LED driver with high frequency operation, suitable for powering both single-color and multi-color LED arrays. It has a wide range of input voltage from 8V to 40V and adjustable output current and voltage. It also features an active power factor correction (PFC) for improved power efficiency. The VE-J0T-MZ-F4 converter has been designed to provide up to 95% efficiency in a small, cost effective package.
The working principle of the VE-J0T-MZ-F4 converter is based on a buck-boost converter topology. The input voltage is fed into a switching converter based on the MOSFET transistor. The transistor is switched on and off at a frequency of up to 2MHz, thus converting the AC input voltage into a DC voltage. This DC voltage is then regulated to the desired output voltage by an internal feedback loop. The output voltage is monitored and adjusted to maintain a constant voltage level. The efficiency of the converter is improved by the use of a good active power factor correction stage.
The VE-J0T-MZ-F4 converter is particularly suitable for LED lighting applications, such as automotive lighting, signage, backlighting, and decorative lights. It can also be used in illumination and control applications, such as stage lighting, traffic signals, and industrial equipment. The high efficiency, low noise, and wide operating temperature range make it an attractive solution for a variety of power conversion applications. It is also capable of providing a stable, constant voltage output, even under varying input conditions, such as those caused by fluctuating input voltages.
The VE-J0T-MZ-F4 converter is a small, reliable, and cost-effective solution for power conversion and LED lighting. It offers a high power efficiency, stable output voltage, and wide operating temperature range, making it a good choice for applications that require efficient power conversion and LED lighting.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...