Allicdata Part #: | VE-J0X-CZ-F3-ND |
Manufacturer Part#: |
VE-J0X-CZ-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.2V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.2V 4... |
DataSheet: | VE-J0X-CZ-F3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 4.81A |
Base Part Number: | VE-J0X |
Size / Dimension: | 2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.2V |
Voltage - Input (Max): | 20V |
Voltage - Input (Min): | 10V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
DC/DC converters are a type of extremely efficient power converters which convert one DC voltage to another DC voltage. The most common type of DC/DC converter is the buck converter, also known as a step down converter. The most common use of buck converters is in mobile battery-powered devices, such as in laptop computers, tablets and smartphones. The purpose of the buck converter is to convert a source voltage, such as from a battery, into a regulated voltage that is needed to power electronic devices.
VE-J0X-CZ-F3 Application Field and Working Principle
The VE-J0X-CZ-F3 is a type of DC to DC converter that is widely used to provide regulated DC voltage to power a device or circuit from an input voltage that is higher than the required output voltage. The VE-J0X-CZ-F3 is featured with 28mm slim design, High Power Density from 0.11W to 8.25W and wide input voltage from 4 – 36VDC. It works by using a switch to connect and disconnect the input source while connecting and disconnecting the output load in order to obtain a desired output voltage.
The VE-J0X-CZ-F3 is suited for applications in industrial and commercial products. The high power density of the converter makes it perfect for those applications that require minimal space, such as laptop computers, tablets and smartphones. As well, its wide input voltage makes it suitable for distributed power systems, such as solar, and renewable energy sources.
The VE-J0X-CZ-F3 operates with PWM (Pulse Width Modulation) switching technique, which is based on a signal generated by internal circuitry and synchronizing the input voltage to the desired output voltage. When the internal circuitry detects the input voltage is higher than the output voltage, the switch is “on” and it is “off” when the input voltage is lower than the output voltage. The PWM technique ensures regulation of the output voltage, low power conversion losses and high power efficiency.
In addition, the VE-J0X-CZ-F3 features extremely low standby power consumption as well as protection including thermal shutdown, over voltage, over current, and over power protections. These features make the VE-J0X-CZ-F3 suitable for use in high-temperature/high-humidity applications.
In summary, the VE-J0X-CZ-F3 is an ideal DC/DC converter for applications that require slim design, high power density, wide input voltage, and reliable PPW-based regulation. Furthermore, its safety and protection features make it suitable for use in extreme environments.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...