VE-J1B-IZ-F2

Current - Output (Max):	263mA
Base Part Number:	VE-J1B
Size / Dimension:	2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-40°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	25W
Series:	VE-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	95V
Voltage - Input (Max):	32V
Voltage - Input (Min):	21V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of DC DC Converters

DC DC converters, also known as DC to DC converters, are devices that convert DC voltage from one level to another. They are widely used to convert voltage from an unregulated DC voltage source to an adjustable, regulated DC voltage output. DC DC Converters can also be used in applications such as motor control, welding, solar power systems and battery charging.

VE-J1B-IZ-F2 DC DC Converter

The VE-J1B-IZ-F2 is a high performance DC DC converter designed to convert DC power from one level to another. This converter is designed to handle input voltages ranging from 15 to 36 volts and output voltages from 0.9 to 5 volts. It has a power supply efficiency of up to 90 percent and a maximum switching frequency of 500 kHz. It can handle loads up to 300W and is protected against over voltage, over temperature and reverse polarity.

VE-J1B-IZ-F2 Application Fields

The VE-J1B-IZ-F2 DC DC Converter is suitable for a wide range of applications including:

• Industrial and automotive systems
• Military and aerospace systems
• Telecommunications and networking systems
• Robotic systems
• Medical systems
• RVs and off-grid systems
• Lighting systems

VE-J1B-IZ-F2 Working Principle

The VE-J1B-IZ-F2 uses a switched mode power supply (SMPS) topology to convert the input voltage to the desired output voltage. The SMPS topology is basically a self-oscillating circuit that generates a PWM signal, which is then used to switch on or off the power transistors to convert the input voltage. The transistors switch on and off at different frequencies, which determines the output voltage level. The output voltage level is set by an external voltage regulator, which is used to adjust the set-point and control the output voltage.

Conclusion

The VE-J1B-IZ-F2 DC DC Converter is a high performance device designed to provide a reliable, adjustable and regulated output voltage from an unregulated DC power source. Its wide range of input and output voltages, high switching frequency, high efficiency and protection features, make it suitable for a variety of applications.

The specific data is subject to PDF, and the above content is for reference