Allicdata Part #: | VE-J1Z-CZ-F4-ND |
Manufacturer Part#: |
VE-J1Z-CZ-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 2V 10W |
More Detail: | Isolated Module DC DC Converter 1 Output 2V 5A ... |
DataSheet: | VE-J1Z-CZ-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 5A |
Base Part Number: | VE-J1Z |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 10W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 2V |
Voltage - Input (Max): | 32V |
Voltage - Input (Min): | 21V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters involve the conversion of a DC input voltage to a different voltage which can be either higher or lower than the input voltage. This can be accomplished using either linear or switch-mode converters. The VE-J1Z-CZ-F4 is an example of a switch-mode DC-DC converter which converts the input voltage to a different voltage level which can be adjusted to suit specific requirements. The following sections will discuss the application field and working principle of the VE-J1Z-CZ-F4.
Application Field
The VE-J1Z-CZ-F4 is a high frequency DC-DC converter which is mainly used in areas where a high efficiency and low power loss is required. These include applications such as LED lighting, industrial equipment, medical equipment, and electric vehicles. The main advantages of using this converter are its small size, light weight, low noise, low cost, and efficiency ratings of up to 94%.
Working Principle
The VE-J1Z-CZ-F4 uses a switching technology called pulse width modulation (PWM), which is the process of varying the width of the input pulses in order to control the output voltage. In other words, the converter takes the DC input voltage and converts it to AC through PWM. The PWM is then used to modulate the voltage of the AC signal in order to produce the desired output voltage. The output voltage can then be adjusted by changing the PWM frequency. This is done by varying the switches in the circuit which controls the average voltage of the output signal. In addition, an inductor and a capacitor are used to filter out unwanted noise and to ensure a smooth output voltage.
Conclusion
The VE-J1Z-CZ-F4 is a high frequency DC-DC converter that is mainly used in applications where a high efficiency and low power loss is required. It uses pulse width modulation to convert the input voltage into a different voltage level. The output voltage can be adjusted by changing the PWM frequency and filtering the signal with an inductor and capacitor. This converter offers several advantages such as small size, light weight, low noise, low cost, and efficiency ratings of up to 94%.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...