VE-J2K-EZ-F4 Power Supplies - Board Mount |
|
Allicdata Part #: | VE-J2K-EZ-F4-ND |
Manufacturer Part#: |
VE-J2K-EZ-F4 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 40V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 40V 62... |
DataSheet: | VE-J2K-EZ-F4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Specifications
Current - Output (Max): | 625mA |
Base Part Number: | VE-J2K |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 88% |
Operating Temperature: | -10°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 40V |
Voltage - Input (Max): | 56V |
Voltage - Input (Min): | 21V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
- DC DC Converters
VE-J2K-EZ-F4 is a type of dc dc converters that are widely used in modern power electronic circuits. It is a two-level voltage conversion topology that can be used in many applications and has multiple output levels ranging from 5V to 200V.It is basically comprised of two bridge rectifiers, a transformer, and rectified switches. The transformer is used to change the input voltage level to the output voltage level, while the rectified switches are used to direct the current flow to the output level. Two pulse-width modulation (PWM) converters are also connected to the rectified switches in order to control the output voltage level.The working principle of the VE-J2K-EZ-F4 DC DC converter is relatively simple. When the input voltage is higher than the output voltage, it operates in buck mode; otherwise, it will operate in boost mode. In buck mode, the two PWM converters open alternately, allowing the two rectified switches to switch in an opposite sequence. This will reduce the voltage at the output and therefore, reduce the current flow to the output level.In boost mode, the two PWM converters close alternately, allowing the two rectified switches to switch in a similar sequence. This will increase the voltage at the output and therefore, increase the current flow to the output level.The VE-J2K-EZ-F4 DC DC converter also has protection features such as overvoltage and overcurrent protection, which protect the transformer and the output level from dangerous levels of voltage and current.VE-J2K-EZ-F4 DC DC converters are a cost-effective and reliable solution for many applications. They can be used for a variety of applications, including motor control, welding and soldering, UPS systems, medical imaging systems, etc.
The specific data is subject to PDF, and the above content is for reference
Latest Products
AEQ20B48N-6L
DC DC CONVERTER 12V 240WIsolated Module ...
AEQ20B48-L
DC DC CONVERTER 12V 240WIsolated Module ...
AEQ20B48-6L
DC DC CONVERTER 12V 240WIsolated Module ...
AEO40Y48N-6L
DC DC CONVERTER 1.8V 120WIsolated Module...
AEO40Y48-L
DC DC CONVERTER 1.8V 120WIsolated Module...
AEO40Y48-6L
DC DC CONVERTER 1.8V 120WIsolated Module...