VE-J31-EW-S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters have become an indispensable part of modern electronic designs. They are used to convert a direct current (DC) from one voltage level to another. Typically, the source and load of a DC-DC converter are two vastly different voltages, and the converter is designed to step up or step down the source voltage to the desired load voltage. Two widely used types of DC-DC converters are switch-mode power supplies (SMPS) and linear regulated power supplies (LRS), with the former considered a more efficient choice. The VE-J31-EW-S is a type of DC-DC converter, belonging to the SMPS category.

SMPS converters, including the VE-J31-EW-S, are characterized by their high efficiency and lower size than their linear regulated counterpart. SMPS converters use complicated switching topologies to achieve high efficiency, but often require additional control circuitry. These converters allow for power efficiency of up to 95%, depending on the design of the circuit. Additionally, these converters are capable of providing outputs which are adjustable, regulated, non-regulated, as well as symmetrical or non-symmetrical. In comparison to LRS, SMPS are better suited for certain applications such as high frequency switching, where the inductor and capacitor components which are inherent in linear regulators would be inadequate.

The VE-J31-EW-S DC-DC converter is designed for indoor or outdoor use in a temperature range of -40°C to +85°C. This device is an isolated, synchronous step-down converter which can provide output currents of up to 3A and output voltages of up to 3.3V. This device can accept an input voltage range from 4.5V to 18V, providing 94% efficiency under typical conditions. The standard 3-phase interleaved system is supplemented with an extra winding for enhanced electromagnetic interference (EMI) reduction and higher power conversion efficiency.

The working principle of the VE-J31-EW-S DC-DC converter is based on a switching topology known as a buck converter, which is a type of SMPS. The converter consists of a power switch, an inductor, and a diode. The switch is used to regulate the output voltage of the converter, and the inductor is used to store energy. The diode is used to protect the switch from reverse-polarity voltages which may be present in the source. The switch is toggled on and off in an interleaved system, allowing for a continuous current to flow to the output.

When the switch is turned on, current will flow from the input to the output through the inductor. This causes the inductor to store energy in the form of a magnetic field, which increases with time. When the switch is turned off, the magnetic field will collapse, causing current to flow through the diode from the inductor to the output. This current is used to supply the load, and the difference in voltage between the input and output is regulated by the frequency and duty cycle of the switch.

In addition to the buck converter topology, the VE-J31-EW-S feature an overvoltage protection which sets the system up to remain functional even if the input voltage of the converter exceeds the set levels. It also features internal operating temperature protection and under-voltage lockout protection. All these features ensure the safe and reliable operation of the device.

In summary, the VE-J31-EW-S is a switching mode DC-DC converter designed for indoor or outdoor use. It is characterized by its small size, high efficiency, and wide operating temperature range. Its working principle is based on the buck converter topology, which uses a power switch, an inductor, and a diode to regulate the output voltage. It also features protection against overvoltage and temperature surges, further improving the safety and reliability of the device.

The specific data is subject to PDF, and the above content is for reference