
Allicdata Part #: | VE-J33-EX-F3-ND |
Manufacturer Part#: |
VE-J33-EX-F3 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 24V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 24V 3.... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 3.13A |
Base Part Number: | VE-J33 |
Size / Dimension: | 2.28" L x 1.80" W x 0.79" H (57.9mm x 45.7mm x 20.0mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 88% |
Operating Temperature: | -10°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 24V |
Voltage - Input (Max): | 60V |
Voltage - Input (Min): | 42V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are electronic devices used to control the voltage level and to regulate current of an input signal. The power of the input source determines the type and size of the converter used. They are typically used to maintain a constant output voltage despite varying load current and input voltage.
One such converter is the VE-J33-EX-F3. It is a type of DC-DC converter specifically designed for low voltage applications. This converter is used mainly in cars, aircraft, ships and other transportation vehicles. It is used to regulate voltages of high-voltage battery packs, small power sources and other devices whose electrical requirements are not always consistent.
The VE-J33-EX-F3 converter works on the principle of step-down conversion. This means that it can be used to take the input voltage and convert it to a lower output voltage. For example, if the input voltage is 48V and the desired output voltage is 12V, then the converter can step down the 48V to 12V. The amount of voltage reduction or step-down conversion is controlled by a potentiometer or a pre-configured setting on a circuit board.
In terms of applications, the converter can be used for a variety of purposes. It is used in industrial power supplies, solar energy systems, instrumentation, and portable electronics. It is also used in automotive applications such as starting systems, control panels and car alarm systems. Finally, it can be used in telecommunications such as radio transmitters and receivers.
Overall, the VE-J33-EX-F3 is a reliable and effective DC-DC converter specifically designed for low voltage applications. It works on the principle of step-down conversion and can be used to convert a higher input voltage into a lower output voltage. In terms of applications, it is used in many different applications ranging from industrial power supplies to telecommunications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...

DC DC CONVERTER 12V 240WIsolated Module ...

DC DC CONVERTER 12V 240WIsolated Module ...

DC DC CONVERTER 1.8V 120WIsolated Module...

DC DC CONVERTER 1.8V 120WIsolated Module...

DC DC CONVERTER 1.8V 120WIsolated Module...
