| Allicdata Part #: | VE-J3T-MZ-S-ND |
| Manufacturer Part#: |
VE-J3T-MZ-S |
| Price: | $ 0.00 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Vicor Corporation |
| Short Description: | DC DC CONVERTER 6.5V 25W |
| More Detail: | Isolated Module DC DC Converter 1 Output 6.5V 3... |
| DataSheet: |  VE-J3T-MZ-S Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Current - Output (Max): | 3.85A |
| Base Part Number: | VE-J3T |
| Size / Dimension: | 2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm) |
| Package / Case: | Half Brick |
| Mounting Type: | Through Hole |
| Efficiency: | 90% |
| Operating Temperature: | -55°C ~ 100°C |
| Features: | OCP, SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 3kV |
| Power (Watts): | 25W |
| Series: | VE-J00™ |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 6.5V |
| Voltage - Input (Max): | 60V |
| Voltage - Input (Min): | 42V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are a type of power electronic devices which is used to convert a higher voltage input power to a lower voltage output power. A very popular type of DC-DC converter is the VE-J3T-MZ-S converter. This converter is widely used to power a variety of electronic devices and systems.
The VE-J3T-MZ-S converter works with a two-phase push-pull converter. This converter consists of a set of four SCRs (silicon controlled rectifiers) in a bridge configuration. The SCRs can be timed with a control signal to switch on and off, resulting in a two-phase AC output. The AC output is then rectified by a series of rectifiers to produce a DC output.
The VE-J3T-MZ-S converter has many advantages over other DC-DC converters. It has a very high power efficiency, with low loss and no need for cooling. It has very fast rise-time, which makes it suitable for applications where high frequency response is required. Additionally, it is very cost-effective, compared to other converters.
The VE-J3T-MZ-S converter can be used in many different applications. It can be used to provide a regulated output voltage from an unregulated input voltage. It can also be used to power devices such as motor drives, power supplies, and lighting. Additionally, it can be used in automotive and aircraft systems to provide a steady power supply.
In order to achieve the desired output voltage, the VE-J3T-MZ-S converter must be connected to a control circuit. The control circuit can vary the firing angle of the SCRs to change the output voltage. Additionally, the control circuit can provide feedback to the rectifiers in the converter to maintain a steady output voltage.
Overall, the VE-J3T-MZ-S converter is an ideal choice for many applications due to its high efficiency and fast rise time. It is an effective choice for applications that require a steady output voltage, such as motor drives, lighting, and power supplies. Additionally, due to its cost-effectiveness, it is becoming increasingly popular in automotive and aircraft systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...