Allicdata Part #: | VE-J6P-IW-F2-ND |
Manufacturer Part#: |
VE-J6P-IW-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 13.8V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 13.8V ... |
DataSheet: | VE-J6P-IW-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 7.25A |
Base Part Number: | VE-J6P |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 13.8V |
Voltage - Input (Max): | 400V |
Voltage - Input (Min): | 200V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are an essential component of power conversion technology, providing the ability to convert a source of DC power into a usable form. The VE-J6P-IW-F2 is one such DC-DC converter that provides a broad range of applications and is used in a variety of power conversion systems. This article will explore the general application field and working principle of the VE-J6P-IW-F2 DC-DC converter.
The VE-J6P-IW-F2 converter is a bridge-type DC-DC converter designed to provide an efficient and precise output voltage. This converter is especially suited for applications requiring high efficiency and low ripple. The device is designed to achieve the highest efficiency and provide a wide range of output voltage range. Its output voltage can be set from 0V to 24V, with a minimum voltage of 0.6V, and maximum ripple of 2%. The device also provides a maximum current capacity of 10A.
The VE-J6P-IW-F2’s primary applications are for wireless power transfer systems, such as cellular phones and LED lighting. The device is also suitable for other applications such as battery charging systems, automotive applications and photovoltaic systems. The device can also be used in solar energy systems, to provide a stable power source. The converter is based on a full-bridge MOSFET PWM topology, and provides a high degree of control over the output voltage and current.
The VE-J6P-IW-F2’s working principle is based on Pulse Width Modulation (PWM). The device is controlled by a digital signal, which is stepped up by a dedicated processor. This digital signal is sent to the converter, which then starts the PWM operational cycle. The output voltage is determined by the PWM’s “on time” and “off time”. During the “on time”, the converter supplies the power to the output. During the “off time”, the MOSFET switches are turned off to dissipate the energy. The output voltage is then adjusted by changing the “on time” and “off time” ratios.
The VE-J6P-IW-F2 is a reliable and efficient DC-DC converter, with a wide range of applications in various power conversion systems. Its use of PWM technology ensures a precise and efficient output voltage. The device has been designed to provide a high degree of control over the output voltage and current, making it suitable for a variety of applications. Its primary applications are in the fields of wireless power transfer systems, battery charging systems, automotive applications and photovoltaic systems.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...