Allicdata Part #: | VE-J6W-IX-F1-ND |
Manufacturer Part#: |
VE-J6W-IX-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 5.5V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 5.5V 1... |
DataSheet: | VE-J6W-IX-F1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 13.64A |
Base Part Number: | VE-J6W |
Size / Dimension: | 2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5.5V |
Voltage - Input (Max): | 400V |
Voltage - Input (Min): | 200V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are used to convert a DC voltage from one value to another. They can be used to increase or decrease voltage, as well as to convert direct current into alternating current. The VE-J6W-IX-F1 DC DC converter is designed for high efficiency and is suitable for a variety of applications.
The VE-J6W-IX-F1 converter is a non-isolated switching DC-DC converter with a synchronous rectifier. It is rated from 18V to 35V input voltage and 2.5V to 6V output voltage. The VE-J6W-IX-F1 converter is capable of delivering up to 15W of power and is highly efficient, with greater than 90% efficiency achievable at full load. The VE-J6W-IX-F1 converter also features a wide range of switching frequency, from 50kHz to 500kHz, and a very low no-load Power of typically below 0.2W.
The VE-J6W-IX-F1 converter is suitable for a variety of applications, including industrial automation, portable instruments, and telecommunications. It has an operating temperature range of -40°C to +85°C and is housed in an 18-pin SIP package, making it suitable for a variety of applications.
The working principle of the VE-J6W-IX-F1 converter is that an inductor is used to store energy in the form of a magnetic field. An input voltage is applied to the inductor, which then charges up the inductor. When the voltage reaches a certain threshold, the input voltage is switched off and the stored energy in the inductor is then released and is converted to output voltage. The output voltage can then be regulated as required.
The VE-J6W-IX-F1 converter offers high efficiency, a wide input voltage range, and wide switching frequency range, making it a suitable choice for a range of applications. It is housed in a compact package and is capable of delivering up to 15W of power, making it suitable for a variety of industrial and consumer applications. The VE-J6W-IX-F1 converter is designed to meet the most demanding applications and is an ideal choice for designers seeking a high-performance solution.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...