Allicdata Part #: | VE-J72-CX-F2-ND |
Manufacturer Part#: |
VE-J72-CX-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 15V 75W |
More Detail: | Isolated Module DC DC Converter 1 Output 15V 5A... |
DataSheet: | VE-J72-CX-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 5A |
Base Part Number: | VE-J72 |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 75W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 15V |
Voltage - Input (Max): | 375V |
Voltage - Input (Min): | 100V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The VE-J72-CX-F2 is a DC to DC converter. This type of converter is designed for applications in which power needs to be converted from a DC input source to either a lower or higher DC output voltage. The VE-J72-CX-F2 is a voltage step-down converter designed to output a voltage that is lower than the input voltage.
The primary function of the VE-J72-CX-F2 is to take input of a certain voltage and to then output at a lower designated voltage. This is done by switching a particular frequency in order to generate a specific output voltage. This switching frequency is controlled by an internal chip. During the conversion from high-to-low voltage, the converter will regulate the output voltage by sensing the feedback voltage. It then adjusts the switching frequency to achieve the output voltage.
The VE-J72-CX-F2 is most frequently used in automotive and aerospace applications, where the converter must be able to withstand extreme temperature and vibration. It is also used in telecommunication networks, in which flexible and reliable voltage supply and conversion is required. Other applications in which this converter is used includes medical imaging, security and surveillance, and industrial automation.
The working principle of the VE-J72-CX-F2 is a relatively simple one. It works by taking in an input DC voltage, typically regulated from 12 – 36 VDC. It then uses a switched mode oscillator to generate a higher frequency than its known main frequency. This higher frequency is then switched on and off at certain intervals to give the output voltage a step-up or step-down waveform. The internal chip of the converter then reads the output voltage level and adjusts the frequency of the oscillator until the desired output voltage is achieved. In order to enable the VE-J72-CX-F2 to maintain the output voltage, it is equipped with a feedback voltage line.
The VE-J72-CX-F2 DC to DC converter is relatively efficient and has a wide input and output voltage range. It is able to withstand high temperature and vibration conditions, making it ideal for extreme environments. Furthermore, its switch mode oscillator is reliable and operates at low switching speeds, creating minimal power noise and electromagnetic interference. As a result, the VE-J72-CX-F2 is a great choice for a wide variety of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...