VE-J74-IX-F1

Current - Output (Max):	1.56A
Base Part Number:	VE-J74
Size / Dimension:	2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm)
Package / Case:	Half Brick
Mounting Type:	Through Hole
Efficiency:	90%
Operating Temperature:	-40°C ~ 100°C
Features:	OCP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	3kV
Power (Watts):	75W
Series:	VE-J00™
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	48V
Voltage - Input (Max):	375V
Voltage - Input (Min):	100V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are devices that convert direct current (DC) from one voltage level to another. Examples include power supplies, battery chargers, and motor controllers. The VE-J74-IX-F1 DC-DC converter is among the products available to purchase.The main component of the VE-J74-IX-F1 converter is a transformer, usually consisting of a primary and secondary winding. These windings are connected in series via a magnetic core, and are then connected to the input and output of the DC-DC converter. The primary winding receives input power from the source, while the secondary winding transmits the output power to the load.The secondary winding is connected to the output of the converter through a rectifier, which is a diode-based device that allows current to flow in one direction only. This is important as the voltage level of the output may differ from the input. When the output voltage is greater than the input voltage, the secondary winding\'s magnetic field induces reverse voltage on the primary coil, forcing the current to flow in the opposite direction. This is referred to as buck-mode DC-DC conversion.When the output voltage is lower than the input voltage, the secondary winding\'s magnetic field induces reverse voltage on its primary coil, forcing current to flow from the secondary winding to the primary winding. This is the boost-mode operation, and is often used to generate higher voltage levels.The VE-J74-IX-F1 DC-DC converter offers a variety of features and benefits. It is a high efficiency, high power, low-voltage step up/step down converter that operates at a maximum voltage of 1200V and at a maximum current of 10A. It is designed to provide a stable supply with an accuracy of ±1%.Additionally, the VE-J74-IX-F1 also features a wide range of input/output voltage ranges. Output voltage levels can be adjusted in small increments, allowing the user to customize the power output. It also offers adjustable limiter switch, reverse polarity protection, overvoltage, overcurrent and short circuit protections.The VE-J74-IX-F1 DC-DC converter is widely used in consumer electronics, automobiles, and industrial applications. It is also used in solar panel systems, emergency power supplies, and emergency lighting systems.The VE-J74-IX-F1 DC-DC converter is a powerful, reliable and cost-effective solution for converting DC power. With its wide range of voltage adjustment ranges, its high-efficiency and its built-in safety features, it is the perfect choice for powering a wide variety of devices and applications.

The specific data is subject to PDF, and the above content is for reference