Allicdata Part #: | VE-JN2-CY-B1-ND |
Manufacturer Part#: |
VE-JN2-CY-B1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 15V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 15V 3.... |
DataSheet: | VE-JN2-CY-B1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 3.33A |
Base Part Number: | VE-JN2 |
Size / Dimension: | 2.36" L x 2.28" W x 1.08" H (59.9mm x 57.9mm x 27.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 15V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
VE-JN2-CY-B1 is a DC DC converter. It is a switching regulator which converts a DC voltage to another DC voltage, either higher or lower in output than the input. The advantage of DC DC converters over other types of voltage converters such as linear voltage regulators is that they are more efficient in their power conversion. As such, VE-JN2-CY-B1 is ideal for applications in which power efficiency is of utmost importance such as in portable electronic devices, automotive applications, and battery-powered systems.
Application Field
VE-JN2-CY-B1 can be used in a wide range of applications. It can be used to power logic circuits and other low current devices that require multiple regulated outputs. It can also be used to power higher current devices such as motors and actuators. Additionally, the converter is ideal for applications where space is limited, as the device is quite small in size.
The converter is also well suited for applications in the medical domain, as it is highly reliable and has a wide temperature range in which it can operate. VE-JN2-CY-B1 is also very cost effective, making it an ideal choice for medical applications that require multiple DC voltage sources.
Working Principle
VE-JN2-CY-B1 works on the principle of the buck-boost converter. This type of converter is able to step-down or step-up the voltage depending on the input and output voltage. The converter uses a switch and a filter capacitor to step either up or down the voltage. Depending on the polarity of the voltage, the switch will either open or close in order to keep the output voltage at the desired level.
In order to produce a desired output voltage, there must be an inductor in the circuit. The inductor helps to provide the current necessary to run the device and is necessary for the circuit to produce the desired output voltage. In order to regulate the output voltage, VE-JN2-CY-B1 also includes a control circuit.
The control circuit monitors the output voltage in order to ensure that it remains within a certain range. If the voltage goes outside of this range, the frequency of the good as it switches on and off is adjusted in order to either increase or decrease the output voltage as necessary.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...