Allicdata Part #: | VE-JN4-CW-F1-ND |
Manufacturer Part#: |
VE-JN4-CW-F1 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 48V 100W |
More Detail: | Isolated Module DC DC Converter 1 Output 48V 2.... |
DataSheet: | VE-JN4-CW-F1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 2.08A |
Base Part Number: | VE-JN4 |
Size / Dimension: | 2.28" L x 1.86" W x 0.79" H (57.9mm x 47.2mm x 20.1mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -25°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 100W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 48V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters
A DC DC converter is an electrical component that can be used for both step-up and step-down voltage conversion. It converts direct current (DC) from one voltage level to another, usually a higher level. DC-DC converters can be used for many different applications, including battery charging, powering electronic devices, motor control, and power supply. In this article, we will focus mainly on the working principle and application fields of a VE-JN4-CW-F1 DC DC converter.
Working Principle
In its simplest form, a DC DC converter consists of an inductor, a diode, and a capacitor. When current passes through the inductor, it creates a magnetic field that stores some energy and resists sudden changes in current. The diode then allows the current to flow in only one direction and prevents the flow of current in the opposite direction. The capacitor helps to smooth out any sudden voltage fluctuations and reduce voltage transients.
The VE-JN4-CW-F1 DC DC converter is a constant current, low drop out (LDO) converter. It uses pulse width modulation (PWM) as its control method to regulate the output voltage and to provide constant input current. The PWM frequencies range from 100 kHz to 1 kHz depending on the load. This makes it suitable for low-power applications where low ripple and noise are required.
Application Fields
The VE-JN4-CW-F1 can be used for a wide range of applications, including powering electronic devices, powering wireless transceivers, battery charging, and motor control. Its constant current, low dropout design allows it to provide a stable and reliable power supply, even with dynamic loads. This makes it ideal for use in consumer electronics, industrial automation, and automotive applications.
The VE-JN4-CW-F1 is ideal for use in point-of-load (POL) applications, where a highly efficient DC DC converter is needed. It can also be used with both single or multiple-cell batteries. It has an extended operating temperature range of -40°F to +158°F, so it can be used in both extreme cold and hot environments.
Conclusion
The VE-JN4-CW-F1 DC DC converter is a reliable, efficient, and compact solution for a wide range of applications, including powering wireless transceivers, motor control, battery charging, and powering electronic devices. Its PWM frequency range and low dropout design make it suitable for use in both low-power and high-power applications. It is also capable of operating in a wide range of temperatures, making it ideal for use in a variety of applications including industrial automation and automotive.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...