Allicdata Part #: | VE-JN4-EY-F2-ND |
Manufacturer Part#: |
VE-JN4-EY-F2 |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 48V 50W |
More Detail: | Isolated Module DC DC Converter 1 Output 48V 1.... |
DataSheet: | VE-JN4-EY-F2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 1.04A |
Base Part Number: | VE-JN4 |
Size / Dimension: | 2.28" L x 1.86" W x 1.04" H (57.9mm x 47.2mm x 26.4mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 88% |
Operating Temperature: | -10°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 50W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 48V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
.DC DC Converters
In electronic terms, DC to DC converters are devices that convert direct current (DC) from one voltage to another. There are many types of DC/DC converters, but the most common are the VE-JN4-EY-F2 types, which are used to power a wide range of applications.
VE-JN4-EY-F2 DC/DC Converters are used in a wide range of applications from medical, industrial, automotive, aerospace, and consumer electronics. They are designed to change the output voltage of a DC source from a low to a higher output voltage. This means that they are used to provide the right amount of energy for the operation of electronic devices, while also protecting them from voltage variations, power supply fluctuations, and other power-related issues.
The way VE-JN4-EY-F2 DC/DC Converters work is quite simple. They use a switch-mode power supply circuit to convert the input DC voltage into an adjustable output voltage. The circuit uses a two-stage conversion system which includes an input rectifier and an output voltage converter. The rectifier converts the AC input voltage into DC, while the output voltage converter takes the DC voltage and adjusts it to the desired output voltage.
The two stages are combined in one device which then produces an adjustable output voltage from a wide range of input DC voltage ranging from 5 to 28 volts. The analog control of the output voltage is achieved using the feedback voltage from the output. The control circuit includes a voltage regulator and a current limiter, which both protect the device from over-voltage or excessive current.
The switching frequency is also adjustable from 2 kHz to 200 kHz to achieve higher efficiency. The high switching frequencies also help reduce current surges, enabling the device to save power. The device is highly efficient, with conversion efficiency of up to 94%.
VE-JN4-EY-F2 DC/DC Converters are ideal for applications which need to achieve both high efficiency and high accuracy. These include automotive, medical, industrial, and consumer electronics applications. These devices are usually housed in a small, lightweight package and are simple to assemble. When used correctly, they provide reliable and precise power control for a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...