Allicdata Part #: | VE-JNB-IZ-S-ND |
Manufacturer Part#: |
VE-JNB-IZ-S |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | Vicor Corporation |
Short Description: | DC DC CONVERTER 95V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 95V 26... |
DataSheet: | VE-JNB-IZ-S Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Output (Max): | 263mA |
Base Part Number: | VE-JNB |
Size / Dimension: | 2.28" L x 1.80" W x 0.52" H (57.9mm x 45.7mm x 13.2mm) |
Package / Case: | Half Brick |
Mounting Type: | Through Hole |
Efficiency: | 90% |
Operating Temperature: | -40°C ~ 100°C |
Features: | OCP, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 3kV |
Power (Watts): | 25W |
Series: | VE-J00™ |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 95V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Direct current (DC) to direct current (DC) converters (DC-DC converters) are electronic devices used to convert DC power from one voltage level to another. Their main advantage over AC power converters is that they can install easily in circuit design and do not require a bulky power transformer. This makes them suitable for applications where space optimization is crucial. VE-JNB-IZ-S DC-DC converters combine several features into a single package, offering high efficiency, increased density, and outstanding performance.
VE-JNB-IZ-S Application Field and Working Principle
VE-JNB-IZ-S DC-DC converters are used in various power-supply applications such as electronic modules, vehicles, and even ground-based surveillance equipment. Thanks to their high efficiency, decreased power loss, and increased reliability, they are especially suitable in applications where the source voltage is higher than the required output voltage. Bi-directional DC-DC converters with controls can also be designed to allow the system to operate in both buck and boost modes.
FE-JNB-IZ-S DC-DC converts use a high-frequency isolated transformer to transfer electrical energy from the input to the output. The transformer consists of two coils with a common core, which is usually made of ferrite. A voltage is applied to the primary winding, which induces a voltage in the secondary winding. The current in the primary winding can be regulated by an amplifier, which allows the converter to step up or step down the voltage. The output voltage is usually regulated with a feedback loop, which senses the output voltage of the converter and adjusts the power accordingly.
The control of the FE-JNB-IZ-S DC-DC converters can be implemented with either analog or digital circuitry. In analog systems, the control signal is applied directly to the amplifier, which adjusts the current in the primary winding of the transformer. Digital control systems use a pulse-width modulation (PWM) technique to adjust the output voltage. In this technique, the current in the primary winding is modulated according to the PWM signal rather than a control signal.
Conclusion
VE-JNB-IZ-S DC-DC converters are ideal for applications where increased efficiency, reduced power loss, and increased reliability are required. They are versatile, as they can be used in both buck and boost configurations, and can be implemented with either analog or digital control systems. The ability to step up or step down the voltage with a single package makes them an attractive solution for many applications.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...